ADSL Sync Rate

Forums › New Zealand Broadband › ADSL Sync Rate

Regs

4066 posts

Uber Geek

Trusted

Snowflake

#89704 7-Sep-2011 20:27

Should i be getting a higher sync rate on ADSL2+?

DownstreamUpstream Hlin Scale18690Loop Attenuation(dB)34.221.1Signal Attenuation(dB)34.220.4SNR Margin(dB)12.413.8Attainable Rate(Kbps)9760945Output Power(dBm)2112.1
DownstreamUpstreamSNR Margin (dB)12.114.9Attenuation (dB)3421Output Power (dBm)2012Attainable Rate (Kbps)9760945Rate (Kbps)8377945K (number of bytes in DMT frame)15714R (number of check bytes in RS code word)1216S (RS code word size in DMT frame)0.597.5D (interleaver depth)968Delay (msec)14.3715FEC1395997CRC180Total ES111Total SES00Total UAS08491

Sales Engineer
Snowflake
www.snowflake.com

about.me/nzregs
Twitter: @nzregs

Regs

4066 posts

Uber Geek

Trusted

Snowflake

#518271 7-Sep-2011 20:30

ugh, the html tables became a real mess

Sales Engineer
Snowflake
www.snowflake.com

about.me/nzregs
Twitter: @nzregs

coffeebaron

6237 posts

Uber Geek

Trusted

Lifetime subscriber

#518291 7-Sep-2011 21:32

For 34db attenuation, I think your sync rate is very good.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

Regs

4066 posts

Uber Geek

Trusted

Snowflake

#518332 7-Sep-2011 23:41

i had a google and found a couple of links that seemed to suggest i should be up towards 13Mbps on ADSL2+:

http://whirlpool.net.au/wiki/dslam_speeds
http://fremnet.net/article/216/adsl-theoretical-speed-calculator
http://en.wikipedia.org/wiki/G.DMT#DMT_history_and_line_rates

Sales Engineer
Snowflake
www.snowflake.com

about.me/nzregs
Twitter: @nzregs

eXDee

4032 posts

Uber Geek

Trusted

#518338 8-Sep-2011 00:10

I would have expected 5000-9000kbps sync with those stats.

coffeebaron

6237 posts

Uber Geek

Trusted

Lifetime subscriber

#518350 8-Sep-2011 06:31

Regs: i had a google and found a couple of links that seemed to suggest i should be up towards 13Mbps on ADSL2+:

http://whirlpool.net.au/wiki/dslam_speeds
http://fremnet.net/article/216/adsl-theoretical-speed-calculator
http://en.wikipedia.org/wiki/G.DMT#DMT_history_and_line_rates

That's most likely with a target noise margin of 6db, but Chorus use 12. How far are you from exchange / cabinet?

Rural IT and Broadband support.

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

cyril7

9061 posts

Uber Geek

ID Verified

Trusted

Subscriber

#518352 8-Sep-2011 07:19

I would say its on the money for 12dB noise margin.

Cyril

Regs

4066 posts

Uber Geek

Trusted

Snowflake

#518498 8-Sep-2011 12:24

OK, thanks guys.

My next question.... attainable rate versus actual rate. 8377 vs 9760. am i on a adsl1 speed profile of some sort?

Sales Engineer
Snowflake
www.snowflake.com

about.me/nzregs
Twitter: @nzregs

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

D1NZ

194 posts

Master Geek

#518688 8-Sep-2011 17:02

Regs: ugh, the html tables became a real mess

with some ADSL modem you could use DMT tool to lower SNR Margin to get more out of your Downstream sync rate.

e.g

cyril7

9061 posts

Uber Geek

ID Verified

Trusted

Subscriber

#518690 8-Sep-2011 17:07

The attainable against acutal is where one is the theoretical based on attenuation and noise margin, the other is reality, I would describe your close enough to not worry.

Cyril