Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


4 posts

Wannabe Geek


Topic # 164383 7-Feb-2015 20:22
Send private message

Hi all,

I have recently bought a new install kit to try and get my sky up and running at the new place.
I have mounted the new dish and cannot get any signal whatsoever on the mysky decoder. I have aligned the lnb's f type connector at approx 8 o clock as they say to align.
I have used a signal tester to get the best signal.
LO on my Lnb is 10.75ghz as shown in the attached image. I have checked the mysky hdi settings to ensure that it is 10.75ghz set.
I seem to have exhausted all options and am stumped as to what the problem could possibly be?
If anyone has any more info or advice on what I could do, that would be greatly appreciated!


Thanks
Eldon

Create new topic
5155 posts

Uber Geek
+1 received by user: 1673


  Reply # 1232695 7-Feb-2015 20:25
Send private message

Call Sky - they will come and install a dish if you move.

1233 posts

Uber Geek
+1 received by user: 154


  Reply # 1232712 7-Feb-2015 20:54
Send private message

If you're sure your alignment is fine then it's most likely your skew - turn it 90 degrees and see what happens

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.