HDMI Splitter Specs

Forums › Sky, Neon, Lightbox › HDMI Splitter Specs

KellyP

1250 posts

Uber Geek
+1 received by user: 115

ID Verified

Subscriber

#208412 10-Feb-2017 18:39

I'm after a HDMI splitter so I can broadcast the MySkyHDi signal to two TVs.

Does the HDCP need to be any specific version in order to operate correctly? Some splitters I've come across are 1.2.

Any issues here?

richms

29099 posts

Uber Geek
+1 received by user: 10210

Trusted

Lifetime subscriber

#1718468 10-Feb-2017 21:00

I gave a friend one of my dirt cheap aliexpress ones that strips off HDCP and it works fine with the old larger mysky boxes.

Richard rich.ms

divxmaster

67 posts

Master Geek
+1 received by user: 7

#1720395 15-Feb-2017 08:43

I just ordered an orei one from amazon, which arrived a few days ago:

"OREI HD-104 1x4 4 Ports HDMI Powered Splitter for Full HD 1080P & 3D Support (One Input To Four Outputs)"

to do exactly that from mysky hdi. I split it out to three TV's and one projector and it works fine.

I haven't come across any hdcp issues.

The power supply is multivoltage too, but you will need and adapter from us to nz plugs.

The orei box is identical to a panlong one that I also have. Same box, different logos on each.

Cheers,

Mike.

KellyP

1250 posts

Uber Geek
+1 received by user: 115

ID Verified

Subscriber

#1721937 17-Feb-2017 16:56

divxmaster:

I just ordered an orei one from amazon, which arrived a few days ago:

"OREI HD-104 1x4 4 Ports HDMI Powered Splitter for Full HD 1080P & 3D Support (One Input To Four Outputs)"

to do exactly that from mysky hdi. I split it out to three TV's and one projector and it works fine.

I haven't come across any hdcp issues.

The power supply is multivoltage too, but you will need and adapter from us to nz plugs.

The orei box is identical to a panlong one that I also have. Same box, different logos on each.

Cheers,

Mike.

Thanks for that. I'm now thinking about getting a 4x2 Matrix Switch instead. Something like this.