I'm using EPG Collector software and had to change the frequency to 12530000 and Symbol Rate to 30000.

Not yet.... but still trying different combinations.  Help would be appreciated also

Ok so i have found the folder that holds the info

/usr/crossepg/providers

you can edit the Optus file with new info

Thanks haydos .  All working now.  I was in the right place, but suffered from fatfingers on the first attempts.

Hi Guys,

This is what i came up with (see below)  to get CrossEPG to see Skys new EPG Data.

Just a few things to Change - No major.

I didn't bother renaming the Satellite - Only the Details inside the Config which is Typically found at usr/crossepg/providers

Runs fine on Vu+Solo2 / Duo2 and Zgemma 

description=Sky NZ OpenTV (Optus D1 on 160.0E)
# nid ,tsid, sid
nid=169
tsid=3
sid=9003
# transponder
frequency=12530000
symbol_rate=30000000
polarization=0
fec_inner=7
orbital_position=1600
inversion=2
system=1
modulation=1
roll_off=0
pilot=2
# channels pids
channels_pids=17
# titles pids
titles_pids=48|49|50|51|52|53|54|55
# summaries pids
summaries_pids=64|65|66|67|68|69|70|71
protocol=opentv

Confirming this works with my Vu Zero.

Hi Guys / Gals.

For those that didn't know.

OpenVix Supports SlyNz / Freeview EPG Data directly out of the box, No need for CrossEPG.

Basically, all that is required after installing OpenVix is to Enable EPG Data Via Koreasat6 which is available via the EPG Menu.

Theres a few other Checks that can also be completed such as Update period etc.

OpenVix will update and Populate the EPG in Minutes - See Pics

Cheers: