Soniq Tivo Remote Code

Forums › TiVo › Soniq Tivo Remote Code

Maxcat

273 posts

Ultimate Geek

#130744 26-Sep-2013 12:09

Recently purchased one of these for the spare room.

But the Tivo remote Soniq codes don't work.

Can anyone advise of other codes to try?

http://www.jbhifi.co.nz/tv-lcd-led-plasma/soniq/40-inch-full-hd-led-lcd-tv-sku-249241/

Skolink

1081 posts

Uber Geek

#903075 26-Sep-2013 13:32

Have you tried going through the entire database?
cover the end of the remote, then hold down TiVo+TVpower until LED remains lit. Then press 0 9 9 9
Press channel down (repeatadly), until your TV turns off (hopefully). Then press Enter. The LED should go out.
If you get to the end of the database (LED turns off) and your TV doesn't turn off, bad luck. There is no way to add more codes to the remote, as it is IR transmitting only, no receiver.

compost

295 posts

Ultimate Geek

#904056 28-Sep-2013 10:48

If none of the codes work then get a learning remote.

I couldn't use one learning remote to control two Tivos - I found that both Tivos would respond when I pressed the some buttons.

A time-poor geek is hardly a geek at all

Skolink

1081 posts

Uber Geek

#904754 29-Sep-2013 20:41

compost: I couldn't use one learning remote to control two Tivos - I found that both Tivos would respond when I pressed the some buttons.

There is a way to do this.

Maxcat

273 posts

Ultimate Geek

#904771 29-Sep-2013 21:10

Go here:

http://support.tivo.com/app/answers/detail/a_id/284

Can anyone see 'Remote Address'?

Maxcat

273 posts

Ultimate Geek

#909194 7-Oct-2013 11:22

More info here for one remote but two Tivos (using DVR switch 1/2 on remote)

http://support.tivo.com/app/answers/detail/a_id/285/session/L2F2LzEvc2lkL05BRXR5OENs