Adult bunk beds?

Forums › Home Workshop DIY › Adult bunk beds?

CrashAndBurn

670 posts

Ultimate Geek

#247849 26-Feb-2019 17:13

We currently live in an apartment, and as we all know, the rooms are small. My son is 14 but is already bigger than me. The problem I have now is that he is asking if there is a way to get some extra desk space in his room. This made me look into bunk beds where the bottom part is a desk. The ones I see on TradeMe mostly have a limit of 90KG for the bed part. My son is just below that. So was wondering if anyone can recommend a place that sells heavy duty ones or custom built?

1 | 2

6019 posts

Uber Geek

Trusted

Geekzone

Lifetime subscriber

#2187676 26-Feb-2019 17:13

Hmmmm. Here we go.

I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.

sleepy

334 posts

Ultimate Geek

#2187681 26-Feb-2019 17:20

There are some Loft beds From Robax in Invercargill that you can put your own desk under and they are made to Australasian standards and often used for adults.

if you pm me i can send you some details and let you know where to buy from

Regards alan

sidefx

3714 posts

Uber Geek

Trusted

#2187682 26-Feb-2019 17:27

how about this, looks like it's rated to 100kg+ and just has a gap where you can put whatever you want below it

https://thebunkhouse.co.nz/collections/loft/products/robax-loft-bunk-bed

(I imagine that these limits also have some safety margins built in so maybe you could get away with a 90kg one for a while if you son is below this currently?)

"I was born not knowing and have had only a little time to change that here and there." | Octopus Energy | Sharesies
- Richard Feynman

CrashAndBurn

670 posts

Ultimate Geek

#2187683 26-Feb-2019 17:31

sidefx:

how about this, looks like it's rated to 100kg+ and just has a gap where you can put whatever you want below it

https://thebunkhouse.co.nz/collections/loft/products/robax-loft-bunk-bed

(I imagine that these limits also have some safety margins built in so maybe you could get away with a 90kg one for a while if you son is below this currently?)

That is exactly what I am looking at as one of my options.

sleepy

334 posts

Ultimate Geek

#2187688 26-Feb-2019 17:43

thats the one

CrashAndBurn

670 posts

Ultimate Geek

#2187690 26-Feb-2019 17:47

Will do some measurements once I get home as from memory there is a sprinkler just above his bed, so not sure if the ceiling is high enough or i would need to figure out a way to minimize the risk of him hitting it accidentally.

Jase2985

13465 posts

Uber Geek

ID Verified

Lifetime subscriber

#2187699 26-Feb-2019 18:16

have a look at theses

https://www.hiddenbed.co.nz/desk-bed

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

engedib

254 posts

Ultimate Geek

#2187708 26-Feb-2019 18:30

We have this for the kids, it will be disassembled into two king singles when they are older. (has sufficient width for the girlfriends too :D)

I can even sleep on the top with the older one, that is 105 + 25kg load.

It has very strong wooden frames.

https://thebunkhouse.co.nz/collections/bunks/products/robax-tasman-bunk-v1?variant=3049619357707

jpoc

1043 posts

Uber Geek

#2187715 26-Feb-2019 18:59

ikea should be able to fix that.

When I lived in Brussels, I bought a hog slapper from my local ikea.

(Hog slapper was actually a hoog-slaaper or high-sleeper in Flemish)

When I lived in Germany, I built one for the two (big) kids. Easy enough construction.

Perhaps a local ikea importer can help you or perhaps a local chippie could knock one up from a photo if you cannot make it yourself.

CrashAndBurn

670 posts

Ultimate Geek

#2187728 26-Feb-2019 19:51

I just did some measurements and I feel that the Robax is too high as the ceiling height is 240 and the bed is 178. Any other suggestions for something lower?

eracode

Smpl Mnmlst
8875 posts

Uber Geek

ID Verified

Trusted

Subscriber

#2187744 26-Feb-2019 21:49

Where are you? If you’re near Auckland, a couple of years ago we saw some nice-looking ones at the Home Ideas Centre in Parnell - may have been the Hiddenbed ones shown adove.

I wouldn’t feel comfortable sleeping on a slapper.

Sometimes I just sit and think. Other times I just sit.

neb

11294 posts

Uber Geek

Trusted

Lifetime subscriber

#2187763 26-Feb-2019 23:01

CrashAndBurn:
We currently live in an apartment, and as we all know, the rooms are small. My son is 14 but is already bigger than me. The problem I have now is that he is asking if there is a way to get some extra desk space in his room. This made me look into bunk beds where the bottom part is a desk. The ones I see on TradeMe mostly have a limit of 90KG for the bed part. My son is just below that. So was wondering if anyone can recommend a place that sells heavy duty ones or custom built?

Any decently-built ones are going to be outrageously expensive. Even then, you're often looking at 40-50mm posts with 15-20mm cross-boards dowelled in, and that's all. We got one with marginally more solid posts (65mm) and crappy dowelling with barely any glue used, you could pull them apart with your hands, which I replaced with more solid dowels with construction adhesive, metal pins through the boards, and angle brackets above and below each board into the end posts. Oh, and I used two packers to screw the top part of the frame into wall joists. That's now reasonably solid, and will take an adult without moving/wobbling.

So you can get a reasonably solid loft bed (not technically a bunk bed, if there's a desk underneath it's a loft bed), you just have to do a bit of DIY to get the "solid" part.

pdh

345 posts

Ultimate Geek

#2187836 27-Feb-2019 07:59

Maybe too simple - but if the Robax is too high, get someone to cut 50 or 100 mm off the bottom of each leg.

CrashAndBurn

670 posts

Ultimate Geek

#2187849 27-Feb-2019 08:19

pdh:

Maybe too simple - but if the Robax is too high, get someone to cut 50 or 100 mm off the bottom of each leg.

That is one option I am considering. I have asked quotes from custom builders, so will see what would be a cheaper option.

pdh

345 posts

Ultimate Geek

#2187852 27-Feb-2019 08:28

Hey - if you're in the Auckland area, I think I can do a competent job of cutting down 4 legs for you.

Classic 5 minute job !

I'm assuming that the bed will come as an assemble-it-yourself kitset.
So just figure out how much you want to remove from the legs and bring them round.

Before assembly, clearly.

1 | 2