Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.
View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | ... | 66
Tinkerisk
4800 posts

Uber Geek
+1 received by user: 3660


  #3318228 9-Dec-2024 04:01
Send private message quote this post

chimera:

 

Timber base re-purposed from another table I had where the top had basically fallen to bits

 

 

I'm really terribly sorry, you forgot to install the eight USB charging sockets. 😉





     

  • Qui nihil scit, omnia credere debet.
  • Firewalls do NOT stop dragons.
  • In effect we have everything to hide from someone, and no idea who someone is.

k1w1k1d
1714 posts

Uber Geek
+1 received by user: 1314


  #3318242 9-Dec-2024 07:41
Send private message quote this post

Nice job. Back in the good books for Christmas.

 

Now all you need is an octagonal lazy susan.


eracode
Smpl Mnmlst
9334 posts

Uber Geek
+1 received by user: 6203

ID Verified
Trusted
Lifetime subscriber

  #3318243 9-Dec-2024 07:44
Send private message quote this post

k1w1k1d:

 

Now all you need is an octagonal lazy susan.

 

 

Is that sort of shape-shaming, work-shaming, sexist talk OK here on GZ?

 

How about: a less-than-circular, diligence-challenged person who 'gets around' to share their favours.





Sometimes I just sit and think. Other times I just sit.


neb

neb
11294 posts

Uber Geek
+1 received by user: 10018

Trusted
Lifetime subscriber

  #3318405 9-Dec-2024 13:57
Send private message quote this post

Sometimes you really need a +2 for posts...


johno1234
3357 posts

Uber Geek
+1 received by user: 2843


  #3318424 9-Dec-2024 15:53
Send private message quote this post

Slowly progressing a table made out of some 60+yo heart Rimu that I found in the basement of our house after we bought it:

 

 


k1w1k1d
1714 posts

Uber Geek
+1 received by user: 1314


  #3318429 9-Dec-2024 16:02
Send private message quote this post

My deepest apologies to Susan for inferring that she was not doing her fair share of domestic duties.

 

Perhaps I should have said an octagonal revolving platter?


larknz
1978 posts

Uber Geek
+1 received by user: 382

ID Verified
Lifetime subscriber

  #3319701 12-Dec-2024 19:09
Send private message quote this post

[img]https://cdn.geekzone.co.nz/imagessubs/db6b726b0bb6f67591a7db49cb0fe6ae.jpg[/img

 

I've just finished my jewelry boxes.


Eva888
2763 posts

Uber Geek
+1 received by user: 2429

Lifetime subscriber

  #3319751 12-Dec-2024 21:24
Send private message quote this post

Really beautiful. What a work of art the recipients will have for posterity. 


johno1234
3357 posts

Uber Geek
+1 received by user: 2843


  #3323337 22-Dec-2024 17:57
Send private message quote this post

Legs are on the table and second coat of oil just on.

 

 

With the crossed legs it is very stable and stiff across but wobbles a little but of pushed along it's long axis so could use a couple of diagonal braces underneath. The simplest would be some 520mm steel braces with 45 degree tabs that would run from the centre of the x to the underside of the table. Can't find such a thing in pre-fabricated form - is there such a thing?

 

Otherwise I could cut and bend and paint black something from this: 

 

https://www.mitre10.co.nz/shop/lumberlok-angle-brace-3m-zinc-galvanised/p/279647

 

It claims to be suitable for tension and compression bracing.

 

I have plenty if left over timber but just a pain of a job to measure, cut and install with a nice finish.

 

Any better suggestions?


richms
29104 posts

Uber Geek
+1 received by user: 10222

Trusted
Lifetime subscriber

  #3323338 22-Dec-2024 18:16
Send private message quote this post

I used antenna stays to steady up my picnic style table. Had access to a crapload of them back at the time. Steel pipe with flattened ends and a hole in it meant to mount to a roof and to a dish post. bend the end and add coach bolt.





Richard rich.ms

johno1234
3357 posts

Uber Geek
+1 received by user: 2843


  #3323734 23-Dec-2024 17:24
Send private message quote this post

Galv steel 41x41 cable tray might work. Just need to cut a tab at each end and hammer it to 45 degrees

Handle9
11927 posts

Uber Geek
+1 received by user: 9683

Trusted
Lifetime subscriber

  #3323801 23-Dec-2024 18:58
Send private message quote this post

johno1234:

Legs are on the table and second coat of oil just on.



With the crossed legs it is very stable and stiff across but wobbles a little but of pushed along it's long axis so could use a couple of diagonal braces underneath. The simplest would be some 520mm steel braces with 45 degree tabs that would run from the centre of the x to the underside of the table. Can't find such a thing in pre-fabricated form - is there such a thing?


Otherwise I could cut and bend and paint black something from this: 


https://www.mitre10.co.nz/shop/lumberlok-angle-brace-3m-zinc-galvanised/p/279647


It claims to be suitable for tension and compression bracing.


I have plenty if left over timber but just a pain of a job to measure, cut and install with a nice finish.


Any better suggestions?



A local fabricator would be able to knock that up for you in an hour. You’d get something that was of the same quality as the rest of the table.

eracode
Smpl Mnmlst
9334 posts

Uber Geek
+1 received by user: 6203

ID Verified
Trusted
Lifetime subscriber

  #3323900 23-Dec-2024 22:09
Send private message quote this post

johno1234:

 

I have plenty if left over timber but just a pain of a job to measure, cut and install with a nice finish.

 

Any better suggestions?

 



 

You’ve put all that time and skill into it so far and done a beautiful job. Now you want to cheap-out on the final part with galv bracing? Please don’t do that - brace it properly with matching timber and you’ll be proud of it.





Sometimes I just sit and think. Other times I just sit.


johno1234
3357 posts

Uber Geek
+1 received by user: 2843


  #3323903 23-Dec-2024 22:14
Send private message quote this post

eracode:

 

johno1234:

 

I have plenty if left over timber but just a pain of a job to measure, cut and install with a nice finish.

 

Any better suggestions?

 



 

You’ve put all that time and skill into it so far and done a beautiful job. Now you want to cheap-out on the final part with galv bracing? Please don’t do that - brace it properly with matching timber and you’ll be proud of it.

 

 

I'm not sure anyone's ever going to see the strut underneath... if it looks bad I can remove it and do redo with some leftover rimu.

 

 


SepticSceptic
2263 posts

Uber Geek
+1 received by user: 779

Trusted

  #3323908 23-Dec-2024 22:43
Send private message quote this post

Flip upside down.
Build a dam from tape, clay, papier mache, around where the leg joins to the top.

About 10mm high.
Pour in 2 part epoxy inside the dam.

1 | ... | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | ... | 66
View this topic in a long page with up to 500 replies per page Create new topic


Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.