Previously known as psycik
Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight
![]() ![]() |
im currently in the process of sourcing this will let you know how i get on
I found the application which does the actual upgrading. It seems to source firmware from the internet as part of its upgrade process.
I haven't managed to get it to upgrade yet however :/
I've used the infield programmer to upgrade the firmware on mine. That software connects to the paradox servers and downloads the latest version for you, unfortunately, there seems to be some limitations on which version is available depending on where you connect from.
If I run the software on a machine which connects via Australia, the latest English version I am offered is 1.34. The firmware file for this is named IP150_V1_34_000_ENG.PUF. From New Zealand, the latest English version offered is only 1.32.
I'm having a few issues connecting to my alarm system remotely as my mobile browser refuses to connect due to unsupported cyphers. I'd really like to get a newer version of the firmware, however, I have not had any luck so far.
There is a comment here about not upgrading to a version greater than 4, however, I have not verified this anywhere else.
Keen to know if anyone else has success at sourcing a newer version.
dolsen:
I've used the infield programmer to upgrade the firmware on mine. That software connects to the paradox servers and downloads the latest version for you, unfortunately, there seems to be some limitations on which version is available depending on where you connect from.
If I run the software on a machine which connects via Australia, the latest English version I am offered is 1.34. The firmware file for this is named IP150_V1_34_000_ENG.PUF. From New Zealand, the latest English version offered is only 1.32.
I'm having a few issues connecting to my alarm system remotely as my mobile browser refuses to connect due to unsupported cyphers. I'd really like to get a newer version of the firmware, however, I have not had any luck so far.
There is a comment here about not upgrading to a version greater than 4, however, I have not verified this anywhere else.
Keen to know if anyone else has success at sourcing a newer version.
but no changes to anything useful like more than one ip connection at a time?
Previously known as psycik
Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight
davidcole:
but no changes to anything useful like more than one ip connection at a time?
There were some changes made, and, I remember thinking at the time that that was cool, however, I don't remember what they were sorry.
I can confirm though that multiple concurrent users can not access the web pages. I have not tested if you can access the web page while someone else is connected via the software port (10000). Can do so this evening if you would like.
dolsen:
davidcole:
but no changes to anything useful like more than one ip connection at a time?
There were some changes made, and, I remember thinking at the time that that was cool, however, I don't remember what they were sorry.
I can confirm though that multiple concurrent users can not access the web pages. I have not tested if you can access the web page while someone else is connected via the software port (10000). Can do so this evening if you would like.
Yeah that'd be handy. Someone was writing a python access to the paradox ip150. but it was using a mix of the web site and the 10000 port. He was hoping to transfer it all over the to 10000 port. I want that to be able to access it with openhab.
Previously known as psycik
Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight
dolsen:
I can confirm though that multiple concurrent users can not access the web pages. I have not tested if you can access the web page while someone else is connected via the software port (10000). Can do so this evening if you would like.
Well, I can confirm that if you have a connection through port 10000, you can not access via the web site with firmware 1.34.
The error message you receive is
"Software currently connected
Please wait while requesting your connection to the software..."
I did see someone accessing via the serial port header (the same one the ip150 is connected to), therefore, you may have to access via that port for concurrent access.
details bellow
http://harizanov.com/2014/07/interfacing-with-paradox-home-security-system-attempt-2/
![]() ![]() |