Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




23 posts

Geek


Topic # 240152 23-Aug-2018 12:16
Send private message

An Arizona 5 Master & Slave HRV system (the control panel with up and down black arrow key) was installed at my own property at July 2010 and it has been working fine. Recently I checked the filters lifespan remained, after quickly pressed the FUNC key twice (when press this key one more time get 3% filter lifespan remained), the ROOF TEMP location has no display and the ROOM TEMP location has display (digit 9 a couple of days ago, and it changed to 10 from yesterday), but before there are displays at both the ROOF TEMP and ROOM TEMP locations. Is there a fault in the system now?

 

I opened the control panel to check the electronic circuit board to see whether there is any problem and it looks fine, just a little bit dust and some "spider silk" like stuff on the circuit board, and I cleaned it away with some electronic circuit board cleaner, then installed the control panel back to its previous status, but the control panel display problem is still the same.

 

The whole HRV system is still working fine (the ventilation level is in the range of 1 to 6, and it has been set to 3 at this winter season), the temperatures displays (for roof, room and set temperatures) on the control panel is fine, the fan can speed up and slow down during the day, if turn off the power from the control panel, the fan can stop running. There is no condensation on the windows at the early morning, and the environment inside the property is dry, the air is f othresh and clean. The roof cavity should be dry and clean, and the roof insulation material was renewed at about 4 years ago and the new roof insulation material can last for 50 years.

 

When quickly press the FUNC key twice, what do the displays on the ROOF TEMP and ROOM TEMP locations represent? what are the range of values of these two display? Are these two displays adjustable and how? At the moment, for the HRV control panel in my place, only the ROOM TEMP location has display when quickly press the FUNC key twice. If this is a fault, is it on the control panel, roof cavity master control unit, sensor or the communication link between the master control unit and the control panel? Is this a problem needed to be addressed quickly, otherwise more serious problem will be occurred later on?

 

I contacted with the installer www.hrv.co.nz for this display problem, but none of them are helpful.

 

 

 

 


Create new topic


23 posts

Geek


  Reply # 2078964 25-Aug-2018 12:50
Send private message

problem solved


1754 posts

Uber Geek
+1 received by user: 215

Subscriber

  Reply # 2078972 25-Aug-2018 13:02
Send private message

SearchingAround:

 

problem solved

 

How?


 
 
 
 




23 posts

Geek


  Reply # 2078976 25-Aug-2018 13:08
Send private message

no display beside the ROOF TEMP is OK, this isn't a fault.


1902 posts

Uber Geek
+1 received by user: 488

Lifetime subscriber

  Reply # 2079053 25-Aug-2018 15:13
Send private message

Goosey:

 

SearchingAround:

 

problem solved

 

How?

 

no display beside the ROOF TEMP is OK, this isn't a fault.

 

 

.. because a 1 to 4-digit number is being displayed using two lines of 2 digits. So a 1 or 2-digit number will not need the second line.


Create new topic


Donate via Givealittle


Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

A call from the companies providing internet access for the great majority of New Zealanders, to the companies with the greatest influence over social media content
Posted 19-Mar-2019 15:21


Two e-scooter companies selected for Wellington trial
Posted 15-Mar-2019 17:33


GeForce GTX 1660 available now
Posted 15-Mar-2019 08:47


Artificial Intelligence to double the rate of innovation in New Zealand by 2021
Posted 13-Mar-2019 14:47


LG demonstrates smart home concepts at LG InnoFest
Posted 13-Mar-2019 14:45


New Zealanders buying more expensive smartphones
Posted 11-Mar-2019 09:52


2degrees Offers Amazon Prime Video to Broadband Customers
Posted 8-Mar-2019 14:10


D-Link ANZ launches D-Fend AC2600 Wi-Fi Router Protected by McAfee
Posted 7-Mar-2019 11:09


Slingshot commissions celebrities to design new modems
Posted 5-Mar-2019 08:58


Symantec Annual Threat Report reveals more ambitious, destructive and stealthy attacks
Posted 28-Feb-2019 10:14


FUJIFILM launches high performing X-T30
Posted 28-Feb-2019 09:40


Netflix is killing content piracy says research
Posted 28-Feb-2019 09:33


Trend Micro finds shifting threats require kiwis to rethink security priorities
Posted 28-Feb-2019 09:27


Mainfreight uses Spark IoT Asset Tracking service
Posted 28-Feb-2019 09:25


Spark IoT network now covers 98% of New Zealand population
Posted 19-Feb-2019 09:28



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.