You're better off just getting a new thermostat from the likes of Hotwire.https://www.theheatingcompany.co.nz/product/touch-screen-thermostat-white/

I had one a while back that I sent to someone on here looking for one but they aren't reliable pieces of kit (the siemens) 

Just make sure you get an electrician to install it.

We recently replaced ours with Siemens RDE100.1 I got on Trademe. I have two RDE 20.1 here, so let me know what you decide and I can make a plan to get them to you.

snnet:

You're better off just getting a new thermostat from the likes of Hotwire.https://www.theheatingcompany.co.nz/product/touch-screen-thermostat-white/

 

I had one a while back that I sent to someone on here looking for one but they aren't reliable pieces of kit (the siemens) 

 

Just make sure you get an electrician to install it.

 

 

cychronz:

We recently replaced ours with Siemens RDE100.1 I got on Trademe. I have two RDE 20.1 here, so let me know what you decide and I can make a plan to get them to you.

Mavarick: @snnet with the one you mentioned or this one https://www.theheatingcompany.co.nz/product/digital-programmable-thermostat/ would they be able to use the exsiting temp probe thats in the floor already?

snnet:

 

You're better off just getting a new thermostat from the likes of Hotwire.https://www.theheatingcompany.co.nz/product/touch-screen-thermostat-white/

 

I had one a while back that I sent to someone on here looking for one but they aren't reliable pieces of kit (the siemens) 

 

Just make sure you get an electrician to install it.

 

 

 

Yes - any combination of thermostat / probe will work - assuming the probe is still OK. Sometimes they go bad - in which case you'll have to rely on the air sensor

Mavarick: @snnet with the one you mentioned or this one https://www.theheatingcompany.co.nz/product/digital-programmable-thermostat/ would they be able to use the exsiting temp probe thats in the floor already?

snnet:

 

You're better off just getting a new thermostat from the likes of Hotwire.https://www.theheatingcompany.co.nz/product/touch-screen-thermostat-white/

 

I had one a while back that I sent to someone on here looking for one but they aren't reliable pieces of kit (the siemens) 

 

Just make sure you get an electrician to install it.

 

 

 

Yes - any combination of thermostat / probe will work - assuming the probe is still OK. Sometimes they go bad - in which case you'll have to rely on the air sensor

Mavarick: @snnet, The Heating co reckon my temp probe isnt compatible with their TH1 unit, although the TH1 look the same as the RDE20.1 but digital

Weird, they're just sensor probes. When I used to do underfloor heating we used any brand probe with any brand thermostat