Stanley Knife blades

Forums › Home Workshop DIY › Stanley Knife blades

1101

3141 posts

Uber Geek
+1 received by user: 1143

#319555 7-May-2025 18:31

Whats currently a good brand for stanley knife blades ?

The last 20 pack I bought , a name brand , were the worst Ive ever had .
They must be the softest metal , not very sharp & go completely blunt extremely quickly .
Its only for hobby stuff , but need to be sharp to cut foam cleanly.

Cheers

RunningMan

9184 posts

Uber Geek
+1 received by user: 4833

#3371258 7-May-2025 18:36

Stanley.

Stu1

1892 posts

Uber Geek
+1 received by user: 489

ID Verified

Subscriber

#3371270 7-May-2025 19:14

I found it cheaper to buy a new fuller knife with blades kit than buy the blades individually . I brought a fiskers pro great knife however can’t even get replacement blades at out local mitre ten

hsvhel

1273 posts

Uber Geek
+1 received by user: 596

ID Verified

#3371277 7-May-2025 20:02

Weird, We run them in the warehouse and replacements have been fine....?

Referral Link Quic

Free Setup use R502152EQH6OK on check out

Senecio

2851 posts

Uber Geek
+1 received by user: 3159

ID Verified

Lifetime subscriber

#3371296 8-May-2025 07:54

I just buy the Stanley/Fuller etc.. ones that are available in Mitre 10 or Bunning when I need them. They're only used in my house for cutting up boxes to fit in the recycling bin and I probably go through a pack of 20 every 2 years. I've tried more expensive one and they don't last any longer. You just need to treat them as a consumable item and replace them as necessary. Holding on to a blade longer than necessary just leads to frustration and often accidents. A blunt blade requires more force which when something goes wrong it really goes wrong.

mdf

3566 posts

Uber Geek
+1 received by user: 1519

Trusted

#3371302 8-May-2025 08:25

Tajima is a premium brand and it is stocked by Bunnings so easy enough to get. As others have said though, I'm not 100% sure it is worthwhile buying premium vs just buying 2-3x more blades for the same price and swapping them out more often. I only buy the Tajima safety blades, since I've not found an alternative and they are really good where you *don't* want a point or risk of self-stabbing is high.

If you haven't already tried them, the serrated Stanley blades are the absolute dogs b**** for general household cuttery and related tasks. I much prefer these over the straight ones. The hook blades are really good in some situations too. Firm believer in using the right tool for the job.

mdooher

Hmm, what to write...
1443 posts

Uber Geek
+1 received by user: 910

ID Verified

Trusted

Lifetime subscriber

#3371444 8-May-2025 12:32

mdf:

If you haven't already tried them, the serrated Stanley blades are the absolute dogs b**** for general household cuttery and related tasks. I much prefer these over the straight ones.

No way I can bring myself to buy a serrated blade with brand in that link... just the thought...

Matthew

Geekzone support

Support Geekzone with one-off or recurring donations Donate via PressPatron.

richms

29097 posts

Uber Geek
+1 received by user: 10206

Trusted

Lifetime subscriber

#3371461 8-May-2025 12:55

I just get the craftright ones in a big pack at bunnings and actually change them when they're blunt. I got a really neat knife a while back that I have not seen again that has a door on the side and you can load 5 or so blades, and just push a button to pull the blade out and when you retract and extend the blade again, you get a new one. Can then stick the blade back in the door the other way around so the other end gets a go on its next trip thru.

Not really interested in longer lasting ones when they cost 10x or more the cheapies and dont seem to have the nice new blade sharpness for much longer.

Richard rich.ms