Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Hatch

816 posts

Ultimate Geek
+1 received by user: 57


#321515 23-Aug-2025 21:21
Send private message

Thinking of installing one in a fridge I use for dry aging meat. As the humidity level is too high.

 

 

 


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
richms
29098 posts

Uber Geek
+1 received by user: 10208

Trusted
Lifetime subscriber

  #3406942 23-Aug-2025 21:50
Send private message

No, but I did get a cheap 12v powered peltier one to put into my filament storage tote. It gets some water in it and does drop it a bit, but nothing like a half kilo of baked silica gel does so I dont bother using it.





Richard rich.ms



fe31nz
1294 posts

Uber Geek
+1 received by user: 423


  #3406956 23-Aug-2025 23:54
Send private message

The ad says 110-220 volts, so according to the specification it is not for NZ as we have 230-240 volts.  Generally, buying anything mains powered from AliExpress is a bad idea, as it will at a minimum be illegal to import into NZ or use here as it will not be certified in accordance with our electrical regulations.  And quite a lot of the AliExpress mains powered gear is actually actively dangerous - built in such a crappy way that it will cause a fire or an electric shock sooner or later, and will likely not last very long before failing.


Hatch

816 posts

Ultimate Geek
+1 received by user: 57


  #3406958 24-Aug-2025 00:29
Send private message

I had a look at the listing and you can buy a 12v or a 220v version.




gzt

gzt
18678 posts

Uber Geek
+1 received by user: 7809

Lifetime subscriber

  #3406987 24-Aug-2025 10:56
Send private message

I see the outlet. Where is the inlet?

MadEngineer
4591 posts

Uber Geek
+1 received by user: 2570

Trusted

  #3406991 24-Aug-2025 11:52
Send private message

fe31nz:

 

The ad says 110-220 volts, so according to the specification it is not for NZ as we have 230-240 volts.

 

 

 

At +/- 10% from nominal 230V that can be 253V.  250v is not unusual.

 

https://eea.co.nz/government-expands-permitted-low-voltage-range-implications-for-edbs-and-der-hosting/





You're not on Atlantis anymore, Duncan Idaho.

tweake
2641 posts

Uber Geek
+1 received by user: 1137


  #3407018 24-Aug-2025 13:42
Send private message

looks like a pielter, which i doubt gets cold enough.

 

i would look at either the silica recharge ones (often used for gun safes, cupboards etc) that you take out and recharge, or the Desiccant dehumidifiers with remote hot air exhaust. downside is having to fit an air vent to let air into the fridge which you might want to filter.


 
 
 

Shop on-line at New World now for your groceries (affiliate link).
Hatch

816 posts

Ultimate Geek
+1 received by user: 57


  #3407039 24-Aug-2025 15:19
Send private message

gzt: I see the outlet. Where is the inlet?

 

I've not seen a dehumidifier before that has an inlet, perhaps that is something with huge industrial level units.

 

This is sold as an electrical cabinet dehumidifer so it just sits inside the cabinet (or in my case the fridge), as any domestic dehumidifier sits inside the environment it is drying.


Hatch

816 posts

Ultimate Geek
+1 received by user: 57


  #3407040 24-Aug-2025 15:23
Send private message

tweake:

 

looks like a pielter, which i doubt gets cold enough.

 

i would look at either the silica recharge ones (often used for gun safes, cupboards etc) that you take out and recharge, or the Desiccant dehumidifiers with remote hot air exhaust. downside is having to fit an air vent to let air into the fridge which you might want to filter.

 

 

Yeah I was considering reusable silcia gel one but it sounds too much work tbh. I'm not sure if a drum desiccant dehumidifier is ideal as it generates a lot more heat, and also the odour aspect, that silica can also absorb odours and sometimes gives off odours isn't really suited to food usage.

 

I wonder what they use for dehumidifying in those $000 all in one dry aging appliances.


gzt

gzt
18678 posts

Uber Geek
+1 received by user: 7809

Lifetime subscriber

  #3407043 24-Aug-2025 15:36
Send private message

Inlet is on the back. The video says 90-265v. Video says 'insert the supplied power cord end into the terminal block and use screwdriver'. This does not sound particularly safe for a potentially wet environment.

https://www.aliexpress.com/item/1005009178042719.html

Hatch

816 posts

Ultimate Geek
+1 received by user: 57


  #3407044 24-Aug-2025 15:41
Send private message

gzt: Inlet is on the back. The video says 90-265v. Video says 'insert the supplied power cord end into the terminal block and use screwdriver'. This does not sound particularly safe for a potentially wet environment.

https://www.aliexpress.com/item/1005009178042719.html

 

 

 

Oooh you meant the power inlet, I thought you meant the air inlet!

 

Glad you figured it out. I don’t have a clue about the safety aspect of things, the environment will not be wet per se, but there will be certainly a higher level of environmental humidity than say a nice dry environment, but probably nothing higher than you’d find in a damp musty closet.


gzt

gzt
18678 posts

Uber Geek
+1 received by user: 7809

Lifetime subscriber

  #3407045 24-Aug-2025 15:43
Send private message

tweake: looks like a pielter, which i doubt gets cold enough.

I have some a similar size they work great. I've had them apart for cleaning. The peltier gets a good frost on.

Good point about temperature. I don't see any temperature effective range figure on that page. What temperature do you run the fridge at?

 
 
 

Stream your favourite shows now on Apple TV (affiliate link).
Hatch

816 posts

Ultimate Geek
+1 received by user: 57


  #3407046 24-Aug-2025 15:48
Send private message

It’ll just be an general fridge cooling temperature which I’ve figured is around 4 degrees C.

 

When doing research I saw some numbers from 10C upwards for Peltier units.

 

Even if that’s true I’m still hoping to get some drying effect out of it, it doesn’t have to dry the fridge completely but just reducing the humidity by 10-20% would be great, just to reduce the chance of moisture building up on both food and fridge surfaces.


gzt

gzt
18678 posts

Uber Geek
+1 received by user: 7809

Lifetime subscriber

  #3407049 24-Aug-2025 15:57
Send private message

Actually mine are 25w purchased from various places. Three out of four have been good.

https://www.mightyape.co.nz/mn/buy/the-shopsite-portable-dehumidifier-800ml-43870822433009

I can't imagine any peltier device is going to be great in a refrigerated environment. One of these for example is going put 25w of heat into your fridge.

gzt

gzt
18678 posts

Uber Geek
+1 received by user: 7809

Lifetime subscriber

  #3407050 24-Aug-2025 16:04
Send private message

This guy says he got the best outcome using a humidity sensor and a tiny heater. Humidity too high, the tiny heater turns on, causing the fridge to run and remove the humidity. Genius.

https://www.localfoodheroes.com/converting-a-fridge-for-drying/

Hatch

816 posts

Ultimate Geek
+1 received by user: 57


  #3408164 28-Aug-2025 15:06
Send private message

gzt: Actually mine are 25w purchased from various places. Three out of four have been good.

https://www.mightyape.co.nz/mn/buy/the-shopsite-portable-dehumidifier-800ml-43870822433009

I can't imagine any peltier device is going to be great in a refrigerated environment. One of these for example is going put 25w of heat into your fridge.

 

Thanks I ended up finding a 40w dehumidifier on FB for $25, this exact one:

 

.

 

Tested overnight and didn't do a thing (unsurprisingly).


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.