Canon Pixma MG5560 - $9 after $50 Cashback @ Dick Smith

To post in this sub-forum you must have made 30 posts or have Trust status or have completed our ID Verification

Forums › Bargains and Deals › Canon Pixma MG5560 - $9 after $50 Cashback @ Dick Smith

ChoiceCheapies

85 posts

Master Geek

ChoiceCheapies

#157563 4-Dec-2014 21:41

Posted this on the website, but as the code expires today, thought I'd share it with the Geeks too.

Came across this when I was walking around their store today, and they are having a $10 off $50+ tonight.

LESS10 is the coupon code for $10 off.

http://www.dicksmith.co.nz/multifunction-scanners/canon-mg5560-multifunction-dsnz-xp6560 is the product URL.

Free click and collect, or $5 shipping.

Claim cashback here: https://www.canon.co.nz/en-NZ/Personal/Products/Special-Offers/nz_pixma_double_cashback_summer_2014

Enjoy :)

cloudlover

58 posts

Master Geek
Inactive user

#1188994 4-Dec-2014 22:25

Did a liitle research and it seemed to be badly reviewed, as already have the $9 brother printer which I haven't used often, I think I'll pass. Thanks for sharing anyway. Looking forward to more great deals :)))

1101

3122 posts

Uber Geek

#1189206 5-Dec-2014 11:16

It will only have starter cartridges, so you will very soon need to buy a complete set of print carts

Still, I paid full price for my canon (approx $150) and that also had useless starter carts.
Its not just the cost of replacing all the carts, its having a brand new printer rapidly run out of ink when you need to print something .

hangon

397 posts

Ultimate Geek

#1189816 6-Dec-2014 11:05

ChoiceCheapies: Posted this on the website, but as the code expires today, thought I'd share it with the Geeks too.

Came across this when I was walking around their store today, and they are having a $10 off $50+ tonight.

LESS10 is the coupon code for $10 off.
Enjoy :)

Thanks, bought one to use as scanner mainly.

A couple of notes - one can't use the scanner without installing the ink cartridges

secondly, the default photo scanning produced lots of tiny highlight artifacts, so I had to use the manual mode (right most button on the scanning utility), advanced mode, I tried a few settings, turn off unsharp mask, turn on descreen (doesn't make sense here), and remove dust set to low, the end result is ok.