Linksys ATA and Voyager VOIP`

Forums › Voyager › Linksys ATA and Voyager VOIP`

networkn

Networkn
32354 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#223191 18-Sep-2017 11:38

Hi.

Has anyone here ever setup a linksys ATA with Voyagers VOIP services?

I have my login and password etc, information provided to allow me to connect my phone to the Zyxel modem I use, but nothing for a third party option.

Any assistance appreciated.

networkn

Networkn
32354 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1869407 20-Sep-2017 14:27

No-one has done this?

chevrolux

4962 posts

Uber Geek
Inactive user

#1869414 20-Sep-2017 14:35

Should be pretty much the same as your Zyxel? To get it working you really only need your proxy address, username and password.

And then just generic settings like ring tones, dial tone, dial plan etc. Which are all searchable (but sbiddles blog is probably still the best for NZ settings)

networkn

Networkn
32354 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1869836 20-Sep-2017 22:02

chevrolux:

Should be pretty much the same as your Zyxel? To get it working you really only need your proxy address, username and password.

And then just generic settings like ring tones, dial tone, dial plan etc. Which are all searchable (but sbiddles blog is probably still the best for NZ settings)

Thanks, it's working!

It does take a long time between dialling the number and it actually making a ringing noise on the handset? IS that a setting that can be changed?

coffeebaron

6234 posts

Uber Geek

Trusted

Lifetime subscriber

#1869845 20-Sep-2017 22:22

That will be the dial plan. Have a look on the 2talk site and grab a copy of theirs.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

chevrolux

4962 posts

Uber Geek
Inactive user

#1869847 20-Sep-2017 22:25

networkn:

chevrolux:

Should be pretty much the same as your Zyxel? To get it working you really only need your proxy address, username and password.

And then just generic settings like ring tones, dial tone, dial plan etc. Which are all searchable (but sbiddles blog is probably still the best for NZ settings)

Thanks, it's working!

It does take a long time between dialling the number and it actually making a ringing noise on the handset? IS that a setting that can be changed?

Yep that's your dial plan. As mentioned, take a look at Steve's blog from years ago. It needs a bit of updating but pretty much everything for the average user is the same - assuming the zyxel uses a standard-ish dial plan? Here is a super basic one I would start with for testing...

111|[2-9]xxxxxx|0[34679][2-9]xxxxxx|02x.|0800x.|0508x.|00x.

Those last few will still give bad delays for your mobiles, 0800, 0508 and international. Mobile is the most annoying with 9,10, 11 digit numbers - that's where Steve's blog comes in to play for a full set of matches. You probably also want something like *xx (would match *55, but not *555) to match any feature codes voyager uses for things like voicemail or call forwards?

Spong

1005 posts

Uber Geek

Trusted

#1869851 20-Sep-2017 22:27

networkn:

chevrolux:

Should be pretty much the same as your Zyxel? To get it working you really only need your proxy address, username and password.

And then just generic settings like ring tones, dial tone, dial plan etc. Which are all searchable (but sbiddles blog is probably still the best for NZ settings)

Thanks, it's working!

It does take a long time between dialling the number and it actually making a ringing noise on the handset? IS that a setting that can be changed?

If you happen to have the optional STUN server settings populated, this can also cause very long delays before ringing. At least this is the issue when setting up 2Talk in a Cisco ATA. This may not be relevant to you, but worth checking.

Tivo upgrades to operate with the new OzTivo EPG, support and service. Over 400 performed here so far. See: www.hillcrest.net.nz

networkn

Networkn
32354 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1869855 20-Sep-2017 22:48

Ok. So I set everything up and it's working fine except I wanted to get that long dialing problem resolved. I setup a new password and logged out and back in and used that same password. Now I have tried to login to change the settings and the username and password don't work! I am essentially locked out.

I had this before. Anyone know what's going on?

I am 100% certain I know the correct password and that I typed it correctly, esp since I logged in with it already.