Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




3 posts

Wannabe Geek


# 136617 3-Dec-2013 14:39
Send private message

Hi all,

We've recently had the gib down during out renovations and our sparky has fitted CAT cabling behind the walls throughout the house.  I have two rooms connected directly by the CAT cabling, our PC room and our TV room, and I'd like to be able to stream from the PC to the TV.  The distance between the rooms is only 4 metres if this matters. 

The wallplate in the TV room has a connection for RJ11 (telephone) and RJ45 (ethernet) so I think I'm looking for an RJ45 to HDMI lead but these don't seem to exist.  Am I missing something obvious?

Thanks in advance.

Create new topic
1874 posts

Uber Geek

Trusted

  # 944758 3-Dec-2013 14:45
Send private message

Possibly yes. You will need to have an ethernet enabled tv, and plug the rj45 cable into the back of the tv, then you would use the media player on the tv to stream the content from the pc via DLNA.
If your tv doesnt have one of these you will need to invest in a media player to do this that will plug into the tv (rj45 to media player, hdmi from media player to tv)



3 posts

Wannabe Geek


  # 944765 3-Dec-2013 14:53
Send private message

Ah, I see.  The TV does not have ethernet capability nor does it have a media player built in.  Sounds like I need to do some research on media players then.  Thanks!

 
 
 
 


1956 posts

Uber Geek


  # 944785 3-Dec-2013 15:09
Send private message

A media player is probably your best option as most TVs are very limited in what types of file they will play. I have a similar setup here. Two CAT6 cables from PC/Office to Lounge. One connects the Tv to the Router in the PC/Office and the other connects the Media Player likewise. The MP has HDMI connection to the TV. The Freeview recorder has WiFi built-in so doesn't need a cable. The TV (Sony) will play some files but the Media Play (A C Ryan) will play everything I've tried so far.

28278 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 944958 3-Dec-2013 20:38
Send private message

You can't just "stream" data over data cabling to HDMI. What were you planning on hooking it up to at the other end? You can run a HDMI signal over cable with a balun at each end.

Are you sure that you have a RJ11 and a RJ45? Your electrician should have only installed RJ45 sockets throughout the house. RJ11 sockets are not used for voice here in NZ (and actual not legal as the PTC spec only covers  BT and RJ45). If they have been installed I'd go as far as suggesting your electrician really doesn't have a clue in the world what he's doing and shouldn't be touching data cabling.

4211 posts

Uber Geek


  # 944981 3-Dec-2013 21:11
Send private message

sbiddle: You can't just "stream" data over data cabling to HDMI. What were you planning on hooking it up to at the other end? You can run a HDMI signal over cable with a balun at each end.

Are you sure that you have a RJ11 and a RJ45? Your electrician should have only installed RJ45 sockets throughout the house. RJ11 sockets are not used for voice here in NZ (and actual not legal as the PTC spec only covers  BT and RJ45). If they have been installed I'd go as far as suggesting your electrician really doesn't have a clue in the world what he's doing and shouldn't be touching data cabling.


+1
And he would have had to go well out of his way to find RJ11 modules.

I think you will find they are actually RJ45 and he has just left off the other 3 pairs and simply multiple'd all the 'phone' outlets at the panel end.

What you is an 'HDMI over Cat5e' adapter. They are around $100 and normally require 2 Cat5e cables.

There are Cat6 adapters available that will send HDMI over a singe cable but they are slightly more expensive and, obviously, you need Cat6.

15172 posts

Uber Geek


  # 944989 3-Dec-2013 21:43
Send private message

chevrolux:
sbiddle: You can't just "stream" data over data cabling to HDMI. What were you planning on hooking it up to at the other end? You can run a HDMI signal over cable with a balun at each end.

Are you sure that you have a RJ11 and a RJ45? Your electrician should have only installed RJ45 sockets throughout the house. RJ11 sockets are not used for voice here in NZ (and actual not legal as the PTC spec only covers  BT and RJ45). If they have been installed I'd go as far as suggesting your electrician really doesn't have a clue in the world what he's doing and shouldn't be touching data cabling.


+1
And he would have had to go well out of his way to find RJ11 modules.

I think you will find they are actually RJ45 and he has just left off the other 3 pairs and simply multiple'd all the 'phone' outlets at the panel end.

What you is an 'HDMI over Cat5e' adapter. They are around $100 and normally require 2 Cat5e cables.

There are Cat6 adapters available that will send HDMI over a singe cable but they are slightly more expensive and, obviously, you need Cat6.


I would have got cat6 cable installed, instead of cat5

5150 posts

Uber Geek

Trusted

  # 945006 3-Dec-2013 22:44
Send private message

chevrolux: 

What you is an 'HDMI over Cat5e' adapter. They are around $100 and normally require 2 Cat5e cables.

There are Cat6 adapters available that will send HDMI over a singe cable but they are slightly more expensive and, obviously, you need Cat6.


That's what I did when redoing all the cabling in our office. We had two pairs going from the server room to where we wanted the TV. And we had a HDMI over Cat5e adapter installed at the head end which requires power.

Haven't tried it out yet but if it doesn't then I will be contacting the contractor!




Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 


 
 
 
 


553 posts

Ultimate Geek


  # 945418 4-Dec-2013 15:17
Send private message

You also need to let us know if you have HDMI out on your PC.

5150 posts

Uber Geek

Trusted

  # 945544 4-Dec-2013 18:31
Send private message

JonnyCam: You also need to let us know if you have HDMI out on your PC.


We didn't but the PC's (business ones) had Displayport so it was easier enough to pick up DisplayPort to HDMI adapters for a few bucks each.




Staying in Wellington. Check out my AirBnB in the Wellington CBD.  https://www.airbnb.co.nz/rooms/32019730  Mention GZ to get a 10% discount

 

System One: Popcorn Hour A200,  PS3 SuperSlim, NPVR and Plex Server running on Gigabyte Brix (Windows 10 Pro), Sony BDP-S390 BD player, Pioneer AVR, Raspberry Pi running Kodi and Plex, Panasonic 60" 3D plasma, Google Chromecast

System Two: Popcorn Hour A200 ,  Oppo BDP-80 BluRay Player with hardware mode to be region free, Vivitek HD1080P 1080P DLP projector with 100" screen, Denon AVRS730H 7.2 Channel Dolby Atmos/DTS-X AV Receiver, Samsung 4K player, Google Chromecast, Odroid C2 running Kodi and Plex

 

 




3 posts

Wannabe Geek


  # 945911 5-Dec-2013 09:41
Send private message

Hi and thanks for the feedback. It sounds like I probably should have signed up here before I went ahead and had the cabling done, heh.

I understand that RJ11 connections are now being commonly installed in new builds and renovations and are probably the voice standard most often used worldwide so I have no concerns about this. I added it for detail only.

The PC has HDMI output through the AMD 7850 graphics card. What I'd intended to happen is PC HDMI > RJ45 wallplate in PC room > CAT cabling behind wall > RJ45 wallplate in living room > TV

This appears not to work because I hadn't factored in for baluns or a media streamer. I'd assumed I could get a RJ45/HDMI cable and things would just magically work. So that was a mistake :)

I'm primarily looking to run my own content so will pick up a WD TV Live box and use a Roku for other content. Are there any problems with this approach? I planned to connect them using the 3 empty HDMI sockets on the TV.

Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

LG Electronics begins distributing the G8X THINQ
Posted 24-Oct-2019 10:58


Arlo unveils its first video doorbell
Posted 21-Oct-2019 08:27


New Zealand students shortlisted for James Dyson Award
Posted 21-Oct-2019 08:18


Norton LifeLock Launches Norton 360
Posted 21-Oct-2019 08:11


Microsoft New Zealand Partner Awards results
Posted 18-Oct-2019 10:18


Logitech introduces new Made for Google keyboard and mouse devices
Posted 16-Oct-2019 13:36


MATTR launches to accelerate decentralised identity
Posted 16-Oct-2019 10:28


Vodafone X-Squad powers up for customers
Posted 16-Oct-2019 08:15


D Link ANZ launches EXO Smart Mesh Wi Fi Routers with McAfee protection
Posted 15-Oct-2019 11:31


Major Japanese retailer partners with smart New Zealand technology IMAGR
Posted 14-Oct-2019 10:29


Ola pioneers one-time passcode feature to fight rideshare fraud
Posted 14-Oct-2019 10:24


Spark Sport new home of NZC matches from 2020
Posted 10-Oct-2019 09:59


Meet Nola, Noel Leeming's new digital employee
Posted 4-Oct-2019 08:07


Registrations for Sprout Accelerator open for 2020 season
Posted 4-Oct-2019 08:02


Teletrac Navman welcomes AI tech leader Jens Meggers as new President
Posted 4-Oct-2019 07:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.