Geekzone: technology news, blogs, forums
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


85 posts

Master Geek

#28661 8-Dec-2008 09:46
Send private message

I have been playing with MP for a while using a Hauppauge HVR3000 for FreeView and Hauppauge PVR150MCE for connecting analogue sky from the STB (a Motorola DTH 320 - old model).

The PVR comes with a USB-connected media remote with two blaster ports. I have configured IR Server to do the blasting from MP and, in testing, got it to turn off/on my TV, but i cannot get the STB to recieve any commands.

IR server appears to capture the commands from the remote without issue, but blasting back is a problem. From my investigative covering and directional remote pointing, I have determined that the IR reciever on the STB appears to be behind the power button, but when I stick the  blaster bug to it, it does not work.

I have come to two conclusions:
1) The capturing of the remote codes is not working correctly
2) The IR reciever and bug are just not close enough for the STB to receive the codes.

Has anyone got an IR server configuration for this STB or had a go at blasting this one. I am tempted to put the front cover off and get the reciever/sender right up and snuggly, but Sky may disapprove :)


Create new topic
4025 posts

Uber Geek


  #182711 8-Dec-2008 11:52
Send private message

For the pace one, which has one of those translucent black panels over the lights, i put a torch on it at the right angle and i could see the receiver inside it.
I've found the blaster bug things work well from 30cm or so, maybe try moving it around and bringing it closer to different parts? I also found it appears to blast out of the end rather than straight through the sticky stuff.


85 posts

Master Geek

  #182900 9-Dec-2008 08:02
Send private message

I have tried to blast from all sorts of angles and locations across the front of the STB with no luck :(

I might see if i can gently remove the cover and get up close and personal.



3343 posts

Uber Geek


  #182922 9-Dec-2008 10:00
Send private message

On the Zenith ones (I think it was Zenith) the iR receiver is actually under the power switch so have to stick the iR repeater/blaster on it to make it work.


85 posts

Master Geek

#183670 12-Dec-2008 07:56
Send private message

I have pulled the STB box temporarily apart to confirm the location of the IR reciever and it was as advised located under the power button.

But no configuration I try in IR Server to blast a signal to this box is ever received. The LED that flashes when a command is sent from its remote does not even indicate that it has recieved any signal.

I double-checked my blaster setup with my TV and all worked well, so it is definitely either capturing the signal from the remote or the STB being to lazy to recieve anything but its own. Do anyone have the remote commands for this old Motorola DTH 320 and when I can manually enter them into IR server?

The STB we have is a very old model, it was changed when we were having signal problems a while back, but we kept the same remote. I wonder if i could convince Sky to change my STB to a more modern one ;).


Create new topic

News »

Huawei introduces new features to Petal Search, Maps and Docs
Posted 26-Oct-2020 18:05

Nanoleaf enhances lighting line with launch of Triangles and Mini Triangles
Posted 17-Oct-2020 20:18

Synology unveils DS16211+
Posted 17-Oct-2020 20:12

Ingram Micro introduces FootfallCam to New Zealand channel
Posted 17-Oct-2020 20:06

Dropbox adopts Virtual First working policy
Posted 17-Oct-2020 19:47

OPPO announces Reno4 Series 5G line-up in NZ
Posted 16-Oct-2020 08:52

Microsoft Highway to a Hundred expands to Asia Pacific
Posted 14-Oct-2020 09:34

Spark turns on 5G in Auckland
Posted 14-Oct-2020 09:29

AMD Launches AMD Ryzen 5000 Series Desktop Processors
Posted 9-Oct-2020 10:13

Teletrac Navman launches integrated multi-camera solution for transport and logistics industry
Posted 8-Oct-2020 10:57

Farmside hits 10,000 RBI customers
Posted 7-Oct-2020 15:32

NordVPN starts deploying colocated servers
Posted 7-Oct-2020 09:00

Google introduces Nest Wifi routers in New Zealand
Posted 7-Oct-2020 05:00

Orcon to bundle Google Nest Wifi router with new accounts
Posted 7-Oct-2020 05:00

Epay and Centrapay partner to create digital gift cards
Posted 2-Oct-2020 17:34

Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.