in-wall speaker recommendations?

Forums › Home Theatre (including HTPC and EPG Collector) › in-wall speaker recommendations?

rphenix

985 posts

Ultimate Geek

Lifetime subscriber

#98541 1-Mar-2012 11:38

What brands are good when it comes to in-wall speakers? Any recommendations?

I want one set for surround sound in the lounge, and maybe another set for a second zone. Not sure if I should go with speakers that are truly in wall or should I just look at mounting book shelf's or some sort of semi-recessed speaker?

marmel

1924 posts

Uber Geek

ID Verified

Trusted

#589025 1-Mar-2012 18:56

I have a set in my lounge. I went with rectangle in-wall models with 8 inch drivers.

I was going to go with 7 speakers but decided it was overkill so have a couple spare if you decide you want to go that way.

Sound quality is very good, not as good as a decent set of full size front speakers but still very good.

cyril7

9058 posts

Uber Geek

ID Verified

Trusted

Subscriber

#589043 1-Mar-2012 19:41

Hi, I have installed a modest number of units from JA Audio the products are good quality and priced very keenly, and they are good to deal with.

http://www.jaaudio.co.nz/

Cyril

Jaxson

8041 posts

Uber Geek

Trusted

#589130 1-Mar-2012 23:46

Hills do a range too.

http://www.hillshomehub.com.au/cattleprod/products/A2100SPK

With any cheaper option though, I'd highly recommend a receiver with a mic setup to electronically compensate with responses that could be all over the place.

rphenix

985 posts

Ultimate Geek

Lifetime subscriber

#589210 2-Mar-2012 09:27

Jaxson: Hills do a range too.

http://www.hillshomehub.com.au/cattleprod/products/A2100SPK

With any cheaper option though, I'd highly recommend a receiver with a mic setup to electronically compensate with responses that could be all over the place.

Thanks. Receiver has the mic setup thing if I can find it somewhere in a box :)

Jaxson

8041 posts

Uber Geek

Trusted

#589245 2-Mar-2012 10:33

Some very similar info:

http://www.geekzone.co.nz/forums.asp?forumid=34&topicid=96897