HDMI over CAT6 with IR

Forums › Home Theatre (including HTPC and EPG Collector) › HDMI over CAT6 with IR

Ham

462 posts

Ultimate Geek

#99003 10-Mar-2012 17:03

Is there such a solution? Over a single run of CAT6? I've googled but can't find anything...

Cheers.

1 | 2

5052 posts

Uber Geek

Trusted

#593276 10-Mar-2012 17:27

You can run HDMI over a single Cat6 up to about 25m, but I don't think you would get IR too.

I was hoping I could get HDMI + USB over a single cable but that doesn't seem possible either

Twitter: ajobbins

Ham

462 posts

Ultimate Geek

#593280 10-Mar-2012 17:42

I could run another CAT6 cable but it wouldn't be equal length, and it would have 2 joins. Would that matter if I were to use something like this...? http://www.rapalloav.co.nz/hdmi-accessories-1/hdmi-wall-plates/hdmi-over-cat5e-cat6-extender-wall-plate.html

marmel

1924 posts

Uber Geek

ID Verified

Trusted

#593746 11-Mar-2012 20:58

Try www.monoprice.com

They have the same product as Rapolla AV but at a third of the price. Shipping will cost more but if you are buying a few things it would be worth it.

I can't see why anyone would purchase from Rapollo with the markup they put on products, we get shafted enough by most electronic prices over here in NZ but 3-4 times the price overses is just taking the p**s.

Here is the monoprice link:

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10425&cs_id=1042501&p_id=8201&seq=1&format=2

CYaBro

4582 posts

Uber Geek

ID Verified

Trusted

#593781 11-Mar-2012 22:19

Computer dynamics have something but they aren't cheap. From memory about $400 each.
They come as two seperate purchases, a transmitter and a receiver, and are do hdmi, ir and rs232 over a single cat6.

Opinions are my own and not the views of my employer.

703

131 posts

Master Geek

#594386 12-Mar-2012 22:42

You can also get HDMI (1.4a spec) over point-to-point wireless, again not cheap, but very cool.

Pock

156 posts

Master Geek

#596794 18-Mar-2012 16:34

This:

http://www.dealextreme.com/p/2-4g-wireless-av-sender-ir-remote-extender-silver-64011

and this for your IR:

http://www.dealextreme.com/p/2-4g-wireless-av-sender-ir-remote-extender-silver-64011 Also has composite video and 2 channel audio, but you obviously wouldn't need to use it for that.

Pock

156 posts

Master Geek

#596795 18-Mar-2012 16:35

This has better reviews:

http://www.dealextreme.com/p/high-power-1-5w-2-4ghz-4-ch-rf-wireless-av-transmitter-receiver-set-w-ir-remote-relay-100v-240v-ac-20507

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

Hoggle

10 posts

Wannabe Geek

#596799 18-Mar-2012 16:44

There is a standard called HDBaseT (http://hdbaset.org/) which should do what you're looking for.

http://www.ebay.com/itm/KanexPro-HDBASE100M-HDBaseT-100m-330ft-HDMI-IR-3D-CAT5-Extender-/200670702699?pt=LH_DefaultDomain_0&hash=item2eb8e7ec6b

richms

28168 posts

Uber Geek

Trusted

Lifetime subscriber

#596950 18-Mar-2012 23:18

Very few extenders will deal with a mysky remote.

And if you get the 2.4GHz wireless video link and only use the IR part, it will still be crapping over 1/3 of the 2.4GHz band with its video carrier even if you dont use it.

Richard rich.ms

surfisup1000

5288 posts

Uber Geek

#596969 19-Mar-2012 08:20

marmel: Try www.monoprice.com

They have the same product as Rapolla AV but at a third of the price. Shipping will cost more but if you are buying a few things it would be worth it.

I can't see why anyone would purchase from Rapollo with the markup they put on products, we get shafted enough by most electronic prices over here in NZ but 3-4 times the price overses is just taking the p**s.

Here is the monoprice link:

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10425&cs_id=1042501&p_id=8201&seq=1&format=2

This is no good, the person wanted a single cable solution.

surfisup1000

5288 posts

Uber Geek

#596972 19-Mar-2012 08:24

Pock: This has better reviews:

http://www.dealextreme.com/p/high-power-1-5w-2-4ghz-4-ch-rf-wireless-av-transmitter-receiver-set-w-ir-remote-relay-100v-240v-ac-20507

This is not HDMI, presumably it cannot do HD video.

surfisup1000

5288 posts

Uber Geek

#596974 19-Mar-2012 08:28

Ham: Is there such a solution? Over a single run of CAT6? I've googled but can't find anything...

Cheers.

http://www.atlona.co.nz/AT-HD4-V40SRS.html

$520.

I've emailed these guys twice asking if it supports mysky IR, but, they ignored my question both times.

Some outfits just don't want to sell their products.

surfisup1000

5288 posts

Uber Geek

#596975 19-Mar-2012 08:29

richms: Very few extenders will deal with a mysky remote.

And if you get the 2.4GHz wireless video link and only use the IR part, it will still be crapping over 1/3 of the 2.4GHz band with its video carrier even if you dont use it.

Very few? Do you know of a single cable solution that does handle mysky IR and Full HD?

richms

28168 posts

Uber Geek

Trusted

Lifetime subscriber

#597041 19-Mar-2012 11:18

surfisup1000:
richms: Very few extenders will deal with a mysky remote.

And if you get the 2.4GHz wireless video link and only use the IR part, it will still be crapping over 1/3 of the 2.4GHz band with its video carrier even if you dont use it.

Very few? Do you know of a single cable solution that does handle mysky IR and Full HD?

No, that was just in relation to the remote part. Not needed to worry about IR yet as I am still sorting out the HDMI part, but cable is cheap compared to some of the gear you see around.

Richard rich.ms

Dunnersfella

4086 posts

Uber Geek

#597052 19-Mar-2012 11:49

703: You can also get HDMI (1.4a spec) over point-to-point wireless, again not cheap, but very cool.

Belkin does this - only 5.1 audio and no ARC...
BUT, the MySky remote does work.
I've seen an on-line review and saw it being used in a store - but it's not available to purchase yet??

1 | 2