D-Link Taipan DSL-4320L set up with static IP

Forums › Spark New Zealand (including Skinny and BigPipe) › D-Link Taipan DSL-4320L set up with static IP

1 | 2

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1677603 25-Nov-2016 19:26

sdavisnz:

Spyware:

VDSL2 connection requires VLAN tagging.

yes for spark, but bigpipe?

VLAN tagging is required for all VDSL2 connections and ADSL2+ if your ISP supports native EUBA using IPoE/PPPoE rather than PPPoA translation.

angusdog

20 posts

Geek

#1677604 25-Nov-2016 19:27

Okay, I entered "10" for that, as per BP's instructions and tried VLAN priority as "7" but no joy. Any suggestions for VLAN priority?

DarkShadow

1647 posts

Uber Geek
+1 received by user: 656

#1677607 25-Nov-2016 19:36

0 like it says on the BP site?

angusdog

20 posts

Geek

#1677614 25-Nov-2016 19:54

Thanks but still no joy...

Lorenceo

904 posts

Ultimate Geek
+1 received by user: 336

Trusted

#1678314 27-Nov-2016 15:00

Does your device pick up an IP address on its WAN interface? It should be set to obtain it automatically on PPPoE with VLAN 10 tagging as mentioned. If you've entered anything in the service name field this will likely cause the line not to authenticate.

Do you see VDSL sync on the line stats at all?

Perhaps post some screenshots of your config as is, and the modem's DSL and WAN status pages?

1 | 2