Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


1 post

Wannabe Geek


Topic # 124525 10-Jul-2013 17:18
Send private message

Trying to port foward a port using a Telecom Thompson TG585 v8, I've added the port as shown in a number of youtube videos, which is the same way I did before referencing them.

Then using http://www.yougetsignal.com/tools/open-ports/ to test if it was actually open,.. I get nothing, says it closed and the person who was trying to connect cant do so.

So I'm guessing its either one of two things, either the modem is FUBAR, or I'm being put through some sort of proxy and my IP is not what it appears on google ( tells you IP your ip if you ask it ;) )

Anyone have any experience with actually managing to port forward with one of these modems successfully ?

Create new topic

dwl

363 posts

Ultimate Geek
+1 received by user: 43


  Reply # 853485 10-Jul-2013 18:18
Send private message

I have found this device rather flakey for port forwarding. I did load a firmware update (now on 8.2.7.8) as the standard version I got from Telecom would reboot with some specific traffic. Are you trying to use the GUI or telnet? You might get different results with telnet but I wouldn't guarantee you will get a usable forwarding outcome. Hopefully some others may have more reliable results and guidance.

306 posts

Ultimate Geek
+1 received by user: 8


  Reply # 853499 10-Jul-2013 18:33
Send private message

That website doesnt seem to work for me either when I tried it a while back.
Use the portforward tool checker, I believe its free now.

I find if you are going to forward ports manually , then disable UPNP.
It seems to work for my friend whoom I did it for a couple of weeks ago :)




iMac 27 2014
Macbook Pro Retina 2013
iPhone 6s
iPad Air 2

VDSL Sync @ 69Mbps Down / 29Mbps Up


222 posts

Master Geek
+1 received by user: 45

Trusted

  Reply # 853502 10-Jul-2013 18:37
Send private message

Here is all the info I have on them.
I'd consider getting a new modem though, I always had trouble with the thomson modems.

dwl

363 posts

Ultimate Geek
+1 received by user: 43


  Reply # 853712 11-Jul-2013 09:41
Send private message

Just had a play using telnet (default password blank) to confirm NAPT can still work for me.

Username : Administrator
Password :
------------------------------------------------------------------------
______ Thomson TG585 v8

The following shows an active port forward:

{Administrator}=>:nat maplist
Idx Type Interface Outside Address Inside Address Use
1 NAT Internet 122.60.xx.yy 127.0.0.1 0
2 NAPT Internet 122.60.xx.yy:12345 192.168.1.3:1234 1

There is an expanded list which can be easier found using the menu option to create the CLI syntax:

{Administrator}=>menu
:nat maplist intf=Internet expand=enabled
Idx Type Interface Outside Address Inside Address Use
2 NAPT Internet 122.60.xx.yy:12345 192.168.1.3:1234 1
Access List................... any
Foreign Address............... any
Protocol...................... tcp
Flags......................... Static
Weight........................ 0
Description................... Inbound port shift
Creator Data.................. 0

To add a mapping it is probably easier to use the menu interface as there are a lot of parameters - when on an item select using Enter and use cursor up|down to chose the option

{Administrator}=>menu
-¦ nat mapadd +-

I found the GUI too simplistic and it wasn't working as I expected with the CLI giving better flexibility. With my firmware I also had active mappings which the GUI didn't even report. If you are comfortable working at the CLI level then you might be able to avoid getting another router but I also agree with the OP that there are probably other routers out there that might suit you better.

For external port probing I use Gibson ShieldsUp. I hope you can get something working as these can be frustrating.

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.