Draytek DV130 settings for BigPipe

Forums › Spark New Zealand (including Skinny and BigPipe) › Draytek DV130 settings for BigPipe

bludhemn

13 posts

Geek
+1 received by user: 1

#141242 5-Mar-2014 19:15

Hey guys,

I've bought a DV130 and did some quick setup, but there is no connection. I've followed a few other posts on this site and set it up, but would appreciate it if any of you could have a quick look to see if it looks fine. Waiting to hear back from BigPipe support.

Thanks

RunningMan

9186 posts

Uber Geek
+1 received by user: 4840

#999694 5-Mar-2014 19:19

Try removing the ISP name and leaving it blank. Unless Bigpipe do port based authentication, make sure you have your own username and password in there too.

Cbfd

307 posts

Ultimate Geek
+1 received by user: 63

#999705 5-Mar-2014 19:28

Try vci at 100 and not 110

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#999733 5-Mar-2014 19:51

Cbfd: Try vci at 100 and not 110

VDSL2 and ADSL2+ if using PPPoE for a native EUBA connection (with VLAN10 tagging) both use 0/110

0/100 is only used for legacy PPPoA

theEd

341 posts

Ultimate Geek
+1 received by user: 26

Trusted

#999739 5-Mar-2014 19:57

I know it probably shouldn't matter, but the username usually used is user@xtrabb.co.nz

Cbfd

307 posts

Ultimate Geek
+1 received by user: 63

#999768 5-Mar-2014 20:16

I could never get mine to connect with 110 just 100 and it was sweet as

bludhemn

13 posts

Geek
+1 received by user: 1

#999808 5-Mar-2014 21:01

Chaps, thanks for the input.

BigPipe support has come back saying that although the line was switched over from ADSL to VDSL, "Chorus had changed some technical details due to issues with the address. The changes had not registered with the server and hence would have to refresh the connection profile in order to update the server "

So right now, until the changes have been reflected, I guess I'm stuck.

HP

Shop now for HP laptops and other devices (affiliate link).

bludhemn

13 posts

Geek
+1 received by user: 1

#999887 5-Mar-2014 23:34

Update:
BigPipe support got back to me mentioning that the changes are all complete. The connection is up and running now. 90 mins to resolve, and I think that's pretty decent.

Thanks guys!