help using Spark modem on another provider :P

Forums › Spark New Zealand (including Skinny and BigPipe) › help using Spark modem on another provider :P

trakman

162 posts

Master Geek

#174959 12-Jun-2015 08:44

sorry to ask in the Spark forum but there isn't a sub-forum for Wireless Nation.

I couldn't see a PPPoE setting in the ADSL or VDSL section my Spark/Huawei modem that I want to recycle and use with my new Wireless Nation connection

- - -

If you are using your own hardware, you will need set up the device with the following settings:

PPP Username: xxxxxx@wirelessnation.co.nz
PPP PW: xxxxxxxx

You will also need to check the following settings are correct:

---ADSL Modem---
Encapsulation: PPPoE
Multiplexing: LLC
Virtual Circuit VPI = 8, VCI = 81
DSL Modulation: multimode

---VDSL Modem---
Encapsulation: PPPoE
Layer 2 Interface: PTM
DSL Latency: Path0
Enter 802.1P Priority: -1(or 1)(Optional)
VLAN ID: -1(or 1)

Jase2985

13457 posts

Uber Geek

ID Verified

Lifetime subscriber

#1323184 12-Jun-2015 08:52

Which Huawei device is it?

http://www.spark.co.nz/help/internet-data/equipment/huawei/hg659-gateway/
http://www.spark.co.nz/help/internet-data/equipment/huawei/hg630b-gateway/

there are how to guide pages there to check/set ADSL/VDSL settings

trakman

162 posts

Master Geek

#1323197 12-Jun-2015 09:02

HG659b
http://www.spark.co.nz/help/internet-data/equipment/huawei/hg659-gateway/check-vdsl-settings-huawei-hg659-hg659b/

how do you set up PPPoE on it?

Jase2985

13457 posts

Uber Geek

ID Verified

Lifetime subscriber

#1323201 12-Jun-2015 09:04

pretty sure it is on PPPoE

trakman

162 posts

Master Geek

#1323203 12-Jun-2015 09:05

ohhhh really?

Jase2985

13457 posts

Uber Geek

ID Verified

Lifetime subscriber

#1323205 12-Jun-2015 09:09

try it and see

my Spark VDSL connection is over PPPoE, but im using a different modem

trakman

162 posts

Master Geek

#1323210 12-Jun-2015 09:15

thanks Jase

Jase2985

13457 posts

Uber Geek

ID Verified

Lifetime subscriber

#1323292 12-Jun-2015 11:59

how did you get on?

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

trakman

162 posts

Master Geek

#1323311 12-Jun-2015 12:26

The wireless nation tech is coming at 4:30pm to do the install. I will get him to help me.

Their product is called 'cable over fibre' - the body corporate didn't want surplus wiring and cabling ruining the heritage look of our apartment building, so they cancelled my previous order with Spark. "Building manager consent denied".
But they never called or emailed me to let me know, so I was waiting on a cancelled order..!

I guess it's going to be VDSL2 from fibre in the basement along the copper wires to my pad.

Anyone know how it works technically?
Can they start a Wireless Nation sub forum here?

BarTender

3606 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1323320 12-Jun-2015 12:40

Should be able to reconfigure the Fibre connection and take off the VLAN Tagging and you should be away.

I assume they just have a regular Ethernet connection for Wireless Nation, then you just PPPoE from there over a ethernet connection rather than ADSL or VDSL.

There is a .1p marking that has "10" in it. Set that to 0, then set the username and password accordingy and you should be away.

Otherwise if it's ADSL or VDSL, you should just need to modify those profiles and set the correct username & password.