Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


computer8

4 posts

Wannabe Geek


#198368 6-Jul-2016 10:56
Send private message

Hi there,

I have just recently brought a Asus DSL AC68U VDSL modem and I was wondering where/how do I enter the Spark VDSL settings in?

Here are the Spark VDSL settings that is in their website:

Operating Mode: VDSL2
PPP Protocol: PPPoE
PPP Username: user@spark.co.nz
PPP Password: password
PPP Auth Type: PAP
Encapsulation: 802.1Q
PCP Marking: 0
VID: 10
MTU: 1,500 or AUTO

Can someone please help me out? It would be great if someone could send me a screenshot of the settings that have :) .

Create new topic
tangerz
662 posts

Ultimate Geek
+1 received by user: 199


  #1587162 6-Jul-2016 14:49
Send private message

You have to login to the router web interface to put in the settings. To do that, first disconnect your PC from any network (ethernet or wifi) that it is connected to. Then:

 

1 - Reboot the PC

 

2 - Connect the PC and the router with an ethernt cable

 

3 - Open a web browser and put 192.168.1.1 in the address bar

 

4 - The web interface should now be asking for a Username and Passsword. User = admin  Password = admin

 

5 - Now in the web interface find the 'xDSL' or 'Connection' settings page (or whatever page has the same fields as the Spark website!)

 

6 - Save the settings and reboot the router.

 

7 - Now connect the router to the telephone jack on the wall and you should be good to go. 

 

 


Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.