2talk on BigPipe Huawei HG659 Modem has anyone actually got working

Forums › Spark New Zealand (including Skinny and BigPipe) › 2talk on BigPipe Huawei HG659 Modem has anyone actually got working

livealittle

75 posts

Master Geek
+1 received by user: 3

#210458 28-Mar-2017 13:45

Have bigpipe Fibre using Huawei HG659 with static IP

I was tinkering last night trying to get 2talk to work on and somehow manged to lose internet access.

Have tried a factory reset but that hasn't seemed to fix the issue so that is a work in progress.

If there is anyone out there has successfully got 2talk to work on a HG659? I would be keen to find out if I have got my settings correct by comparing.

Thanks

DarkShadow

1647 posts

Uber Geek
+1 received by user: 656

#1749401 28-Mar-2017 13:50

See my post here

jonathan18

7415 posts

Uber Geek
+1 received by user: 2850

ID Verified

Trusted

#1749439 28-Mar-2017 14:29

Yeah, I had no problems setting up 2Talk on an HG659 using BigPipe fibre (no static IP address though); it's worked fine with both the Spark and now BigPipe firmware (originally a Voda-supplied router).

Snackos

243 posts

Master Geek
+1 received by user: 19

#1799015 13-Jun-2017 03:26

There's a stupid like checkbox that is very easy to miss. Make sure that is ticked otherwise VoIP won't even be enabled. They really need to make that checkbox more obvious.

Fiveonefive

13 posts

Geek
+1 received by user: 1

#1799489 13-Jun-2017 15:36

http://pages.bigpipe.co.nz/bigpipe-modem-setup/#how-to-connect-on-ufb

You could try to use the BigPipe firmware image found in the above link