Port forwarding on Spark wireless LAN

Forums › Spark New Zealand (including Skinny and BigPipe) › Port forwarding on Spark wireless LAN

Petenz

4 posts

Wannabe Geek

#255800 30-Aug-2019 13:43

Having just started with Sparks new Wireless Lan instead of copper line and wishing to use a Port Forward utility I find I am unable to access anything other than a password change in the router. I use a program called PlanePlotter which charts aircraft over the world and in my case NZ. With no port forwarding utility I cannot get or give raw data which is essential to be linked in to the PlanePlotter system. Is there any way I could access the router NAT facility to do Port Forwarding? Any ideas anyone?

1 | 2

9073 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#2308467 30-Aug-2019 13:45

I think you will find a) you cannot access port forwarding on that router (could be wrong) but also your sitting behind CG-NAT so it wont work anyway.

Cyril

Linux

12173 posts

Uber Geek
+1 received by user: 8469

Trusted

Lifetime subscriber

#2308469 30-Aug-2019 13:49

Nope not on wireless won't happen

Zeon

3926 posts

Uber Geek
+1 received by user: 759

Trusted

#2308470 30-Aug-2019 13:51

Do they have IPv6 yet?

Speedtest 2019-10-14

Linux

12173 posts

Uber Geek
+1 received by user: 8469

Trusted

Lifetime subscriber

#2308471 30-Aug-2019 13:52

Zeon:

Do they have IPv6 yet?

Not on mobile

Edit: I don't even think on fixed as well no IPv6

coffeebaron

6304 posts

Uber Geek
+1 received by user: 3566

Trusted

Lifetime subscriber

#2308473 30-Aug-2019 13:58

You can request static IP, $15 per month.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

Oblivian

7345 posts

Uber Geek
+1 received by user: 2117

ID Verified

#2308483 30-Aug-2019 15:00

Petenz:

Having just started with Sparks new Wireless Lan instead of copper line and wishing to use a Port Forward utility I find I am unable to access anything other than a password change in the router. I use a program called PlanePlotter which charts aircraft over the world and in my case NZ. With no port forwarding utility I cannot get or give raw data which is essential to be linked in to the PlanePlotter system. Is there any way I could access the router NAT facility to do Port Forwarding? Any ideas anyone?

DOH! There goes your MU status (and some our MLAT deocdes)

Likely going to have same trouble in near future with mine being the MU in Christchurch (PH) with 2D latest announcement that CG-NAT is coming.

Lenovo

Shop now for Lenovo laptops and other devices (affiliate link).

tdgeek

30048 posts

Uber Geek
+1 received by user: 9455

Trusted

Lifetime subscriber

#2308485 30-Aug-2019 15:24

cyril7:

I think you will find a) you cannot access port forwarding on that router (could be wrong) but also your sitting behind CG-NAT so it wont work anyway.

Cyril

If a Static is assigned, the BB side moves off CG-NAT. I am pretty sure port forwarding works then, but also vaguely, it wasnt that intuitive to save the setting I think.

@cbrpilot will add more

cyril7

9073 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#2308489 30-Aug-2019 15:50

Hi, thats what I would expect it would do, otherwise its a little pointless.

Cyril

Petenz

4 posts

Wannabe Geek

#2308633 30-Aug-2019 20:43

I have also discovered that PiAware cannot connect to Flightaware and is thus down the drain along with PlanePlotter now that I am on Spark wireless Broadband.

chevrolux

4962 posts

Uber Geek
+1 received by user: 2638
Inactive user

#2308659 30-Aug-2019 22:23

You just need to ask Spark for a static IP. It will cost a little bit more.

Why did you move to wireless in the first place? Cheaper? Faster?

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2308669 31-Aug-2019 00:46

For your usecase, You will need to request a static ip. port forwarding will work after that.

Fill out this form, should be sorted on monday.

http://spark.co.nz/staticip

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2308670 31-Aug-2019 00:47

tdgeek:

cyril7:

I think you will find a) you cannot access port forwarding on that router (could be wrong) but also your sitting behind CG-NAT so it wont work anyway.

Cyril

If a Static is assigned, the BB side moves off CG-NAT. I am pretty sure port forwarding works then, but also vaguely, it wasnt that intuitive to save the setting I think.

@cbrpilot will add more

It's a heck of alot better on the b618, which has been our default modem for a fair while now..

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Petenz

4 posts

Wannabe Geek

#2308752 31-Aug-2019 10:55

hio77:

For your usecase, You will need to request a static ip. port forwarding will work after that.

Fill out this form, should be sorted on monday.

http://spark.co.nz/staticip

Getting Wireless Broadband seemed the obvious solution given that it was faster and half the cost per month. However if I get a static address to solve this problem it will cost a little extra ….$15.00 a month apparently, but still no guarantee that I can install port forwarding (UDP 7942) Needs more investigation I think.

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2308754 31-Aug-2019 11:02

Petenz:

Getting Wireless Broadband seemed the obvious solution given that it was faster and half the cost per month. However if I get a static address to solve this problem it will cost a little extra ….$15.00 a month apparently, but still no guarantee that I can install port forwarding (UDP 7942) Needs more investigation I think.

Port forwarding works fine with a static ip.

It's purely that wireless broadband doesnt have a public ip without it.

Port forwarding works on the B315 too, but it can be clunky to use.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Petenz

4 posts

Wannabe Geek

#2308799 31-Aug-2019 14:22

I am now on B618-xxx and it is fast and seems fine for Telephone and Internet.

1 | 2