Jetstream versus MSN Messenger

Forums › Spark New Zealand › Jetstream versus MSN Messenger

Mahuhu

109 posts

Master Geek

Topic # 5088 27-Sep-2005 14:38

I hope this is the right place for my topic... :)

Is anyone having the same problem: I cannot speak with my friends abroad via MSN Messenger (7.5) using Jetstream 2Mb broadband inernet connection

If I invite them or they invite me for audio conversation there comes an error message saying problems with my network...(??)

The video is working fine and we can speak also using Skype, but Messenger sux in audio.. why?

Any advice welcome!

chiefie

I iz your trusted friend
5755 posts

Uber Geek
+1 received by user: 134

Mod Emeritus

Trusted

Subscriber

Reply # 20606 27-Sep-2005 14:51

do you use ADSL Router? is it UPnP friendly?

what could be causing the problem is the router does not know what to do with the packet and doesn't know how to route it. UPnP can ease this problem and automatically set up the route when required and terminate it when it's not required.

Check or use the MSN Messenger troubleshoot and check with your router and see what ports need to be opened etc.

However, in all saying, this sympton should not be happening as 7.5 has been touted to support better voice and better UPnP request... so check your router.

Internet is my backyard...

«Geekzone blog: Tech 'n Chips Takeaway» «Personal blog: And then...»

Please read the Geekzone's FUG

Mahuhu

109 posts

Master Geek

Reply # 20607 27-Sep-2005 14:54

I am using a Nokia M1122 ADSL modem/router.
Anybody can give me clear instructions what to check? (I am not an expert... yet)

Thanks for the advice, much appreciated.

chiefie

I iz your trusted friend
5755 posts

Uber Geek
+1 received by user: 134

Mod Emeritus

Trusted

Subscriber

Reply # 20608 27-Sep-2005 14:59

oh m1122 is such an old router and it's not really supporting UPnP.. best way is check with MSN Messenger Connection Troubleshooter and follow what it suggests on how to open the port...

or if you want, you probably be looking at Dynalink or anyone that support UPnP. makes your life so much easier when it comes to new internet programs that need to be routed behind NATs.

Internet is my backyard...

«Geekzone blog: Tech 'n Chips Takeaway» «Personal blog: And then...»

Please read the Geekzone's FUG

Mahuhu

109 posts

Master Geek

Reply # 20610 27-Sep-2005 15:02

Thx. I have a spare Dynalink at home, I will try.

chiefie

I iz your trusted friend
5755 posts

Uber Geek
+1 received by user: 134

Mod Emeritus

Trusted

Subscriber

Reply # 20613 27-Sep-2005 15:13

just be aware that, not all adsl router have UPnP. check with dynalink site and see if there's any update to the firmware... generally, any ADSL router that released 1.5 years ago are UPnP compatible.

Internet is my backyard...

«Geekzone blog: Tech 'n Chips Takeaway» «Personal blog: And then...»

Please read the Geekzone's FUG

Felix

344 posts

Ultimate Geek

Trusted

Reply # 20682 28-Sep-2005 17:22

hey dude,

you just need to punch the right pin holes... I have the config but it's at home... will post tomorrow or the next day...

Felix

www.mashnz.com