[WXC/VFX] VFX volume - can it be adjusted?

Forums › One NZ (including Farmside) › [WXC/VFX] VFX volume - can it be adjusted?

AKT

335 posts

Ultimate Geek
+1 received by user: 15

ID Verified

Lifetime subscriber

#110085 2-Oct-2012 21:55

Sorry if this has been answered elsewhere, but I couldn’t find the answer.

Can you change the volume of the mic with VFX? I can hear people just fine (a little too loud if anything) but they tell me I am really quiet, is it possible to turn up the gain on the mic with settings on my ATA or not?

I have a SPA2102 with auto provisioning

Cheers

Andy

1 | 2

174 posts

Master Geek

Trusted

#695187 2-Oct-2012 21:59

Yes it is Andy, PM me your ph number and i'll adjust it up for you

Nicholas Cuc

Network Support
WorldxChange Communications
www.xnet.co.nz

AKT

335 posts

Ultimate Geek
+1 received by user: 15

ID Verified

Lifetime subscriber

#695190 2-Oct-2012 22:04

thank you - PM'd

Zeon

3926 posts

Uber Geek
+1 received by user: 759

Trusted

#695198 2-Oct-2012 22:28

What's that deary?!?!

Speedtest 2019-10-14

Griven

174 posts

Master Geek

Trusted

#695208 2-Oct-2012 22:41

Config changed, will need a restart to grab new config. Let me know if still too low.

Nicholas Cuc

Network Support
WorldxChange Communications
www.xnet.co.nz

AKT

335 posts

Ultimate Geek
+1 received by user: 15

ID Verified

Lifetime subscriber

#695209 2-Oct-2012 22:43

Griven: Config changed, will need a restart to grab new config. Let me know if still too low.

Will do - thanks again

A

@Zeon eh?

Griven

174 posts

Master Geek

Trusted

#695966 4-Oct-2012 10:30

If its still too low you will have access to modify it on your "regional" tab via the gui of the SPA2102

Nicholas Cuc

Network Support
WorldxChange Communications
www.xnet.co.nz

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

grudge

266 posts

Ultimate Geek
+1 received by user: 26

#696232 4-Oct-2012 16:32

Griven: If its still too low you will have access to modify it on your "regional" tab via the gui of the SPA2102

Just to clarify, under this regional menu it's the Gain setting you are after, and it's value can be modified in increments of 3.
eg. -6, -3, 0, 3, 6 etc..

AKT

335 posts

Ultimate Geek
+1 received by user: 15

ID Verified

Lifetime subscriber

#696235 4-Oct-2012 16:34

grudge:
Griven: If its still too low you will have access to modify it on your "regional" tab via the gui of the SPA2102

Just to clarify, under this regional menu it's the Gain setting you are after, and it's value can be modified in increments of 3.
eg. -6, -3, 0, 3, 6 etc..

Thanks for the tips. I am away from home at the moment, but will look into it on my return.

A

grudge

266 posts

Ultimate Geek
+1 received by user: 26

#696236 4-Oct-2012 16:36

Oh forgot one thing, make sure you click on advanced view at the top while under Regional menu, otherwise you won't see the Gain option.

AKT

335 posts

Ultimate Geek
+1 received by user: 15

ID Verified

Lifetime subscriber

#711856 4-Nov-2012 18:24

grudge: Oh forgot one thing, make sure you click on advanced view at the top while under Regional menu, otherwise you won't see the Gain option.

OK, so I finally got round to trying this out….

As I am auto provisioned (I assume) I am unable to get the admin settings of any of the router (i.e. not just the Line1 which VFX sort out) and therefore can’t get the Gain settings. I can’t even get to the admin settings for the WAN stuff. It asks for a password and as I thought I couldn’t remember whatever I had set it to I ended up resetting the SPA 2102 and starting from scratch (where I could get admin access) setting up auto provisioning, once it’s setup I can no longer get to the admin settings.

Any ideas?

Also if this isn’t possible for me to do, could someone from VFX set the gain to 6 please.

Thanks

Andy