[WXC/VFX] Getting Open VFX account to register using Zentyal Server and SFL softphone

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] Getting Open VFX account to register using Zentyal Server and SFL softphone

rvanlijf

2 posts

Wannabe Geek

#116591 3-May-2013 13:03

I followed Xnet's instructions and can't register.
It should be as simple as entering Username, Password, Server and Fixed IP address in the VoIp section of Zentyal.
No positive result.
I decided to enter all information in Asterisk through Terminal (Ubuntu)
Still no positive result.

Using similar details fro Slingshot provides a connection in less than 2 sec. (Other account)

Please show me the way how to establish the Open VFX connection.

coffeebaron

6236 posts

Uber Geek

Trusted

Lifetime subscriber

#810795 3-May-2013 13:17

Does it have an Auth User field?

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#810814 3-May-2013 14:10

You also need to enter the SIP AuthID.

Open VFX works fine with Asterisk so you're clearly entering incorrect user details into there as well.

Zentyal doesn't seem to have anything in the way of documentation on their website so they'd clearly be the best people to contact for support.

rvanlijf

2 posts

Wannabe Geek

#810829 3-May-2013 14:38

SIP Authid has not been provided in xnet's information. So, where can I find it?

Also, two people spend many hrs. to get Open VFX registered on my Ubuntu machine. Sure we did not make input mistakes!
No problem with Zentyal as proven by loading Slingshot details in VoIP section. No need to touch anything in Asterisk. All automatic in 2 sec.

Thanks for fast response anyhow!

coffeebaron

6236 posts

Uber Geek

Trusted

Lifetime subscriber

#814020 8-May-2013 21:34

You will have received some settings like this:
Proxy: pan.wxnz.net
UserID: 99501234
AuthUser: dflmkdfdf84398jdn
AuthPassword: dmljoijodf8erjfefjf8

Rural IT and Broadband support.

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

Zeon

3918 posts

Uber Geek

Trusted

#814041 8-May-2013 22:10

rvanlijf: SIP Authid has not been provided in xnet's information. So, where can I find it?

Also, two people spend many hrs. to get Open VFX registered on my Ubuntu machine. Sure we did not make input mistakes!
No problem with Zentyal as proven by loading Slingshot details in VoIP section. No need to touch anything in Asterisk. All automatic in 2 sec.

Thanks for fast response anyhow!

I don't believe that 2talk use AuthID. I'm a bit paranoid of VOIP security so prefer to have it (and have been hacked, so glad WxC picked it up and cut things off!)

Speedtest 2019-10-14

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#814139 9-May-2013 05:45

rvanlijf: SIP Authid has not been provided in xnet's information. So, where can I find it?

Also, two people spend many hrs. to get Open VFX registered on my Ubuntu machine. Sure we did not make input mistakes!
No problem with Zentyal as proven by loading Slingshot details in VoIP section. No need to touch anything in Asterisk. All automatic in 2 sec.

Thanks for fast response anyhow!

The problem lies with your config and Zentyal - if you haven't entered your SIP AuthID it's not going to work.