[WXC/VFX] VFX on a TP Link TD-VG3631

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] VFX on a TP Link TD-VG3631

bjorn

192 posts

Master Geek

#120889 17-Jun-2013 11:55

Hi Guys

What are the settings I use in the below fields?

grudge

266 posts

Ultimate Geek

#838038 17-Jun-2013 12:22

Hi bjorn,

You will need to have :

Phone number : Your phone number without the leading 0
Registrar address : pan.wxnz.net
Auth Realm : pan.wxnz.net
Auth ID: (paste AuthUser from your welcome email)
Password : (paste AuthPassword from your welcome email)

Sip Proxy shouldn't need it with registrar address filled in, but if you do (Inbound and Outbound) : 58.28.20.150

PM me your phone number if this doesn't work, and i'll check it on our end to see if we are getting anything from your device.

Ragnor

8218 posts

Uber Geek

Trusted

#838044 17-Jun-2013 12:31

Have you told them you want to use "OpenVFX" ie: use your own hardware instead of their recommend hardware with automatic provisioning?

I think they should give you the settings via email then.

You can see the settings for some other devices for OpenVFX at this link below and work out what goes where in the TP Link
http://help.xnet.co.nz/categories/Open+VFX%7B47%7DDVX/

Also good luck, no guarantee your TP Link will work correctly or have configuration for all the options you need to be able to set.

bjorn

192 posts

Master Geek

#839310 19-Jun-2013 13:19

For anyone setting this up in the future.... I used this:

Profile Name: XnetVFX
Phone Number: Phone number without leading 0
Display Name: Phone Number
Authentication Realm: -blank-
Authentication ID: authid
Password: password
Registrar Address: pan.wxnz.net
SIP Proxy: pan.wxnz.net
Outbound Proxy: 0.0.0.0

Registrar Port: 5060
SIP Proxy Port: 5060
Outbound Proxy Port: 5060

Preferred Codec 1: G.711ALaw
Preferred Codec 2: G.711MuLaw
Preferred Codec 3: G.722
Preferred Codec 4: G.729a/b