Sure Signal on InHome network

Forums › One NZ (including Farmside) › Sure Signal on InHome network

mclean

584 posts

Ultimate Geek
+1 received by user: 182

Subscriber

#127184 1-Aug-2013 19:25

Has anyone managed to get a Sure Signal device working on the Telstra Clear cable network? Vodafone say it should work but they don't seem to be able to make it work for me. Anyone know what's the secret?

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#870257 1-Aug-2013 19:37

It's worked for about 6 months now - I had one I was testing for a while.

johnr

19282 posts

Uber Geek
+1 received by user: 2526
Inactive user

#870260 1-Aug-2013 19:41

Was the unit obtained from VodafoneNZ?

Yes it should work have you seen the help page on the main Vodafone NZ site?

edit: add link

http://help.vodafone.co.nz/app/topics/kw/Sure%20signal

mclean

584 posts

Ultimate Geek
+1 received by user: 182

Subscriber

#870305 1-Aug-2013 20:47

johnr: Was the unit obtained from VodafoneNZ? Yes it should work have you seen the help page on the main Vodafone NZ site?

Hi John. Yes, purchased on-line from Vodafone a couple of weeks ago, along with a phone (from the local shop).

Yes I've studied the help page. I must admit I don't fully understand it. First of all it says the Sure Signal must have a DHCP assigned IP address so it's routeable to over the internet. My router has a static IP, which I understand it has to have on the cable network, so I'm not sure if I need to change something here. Your techs said I should leave it a it is.

The router firewall settings are default, which I think is OK - everything out from the LAN is allowed, everything in to the LAN is blocked.

Then the guide says I should be using the Vodafone Public DNS servers. I've always used the Telstra Clear servers. On the suggestion of your techs we tried the Vodafone ones. That didn't make any difference, so we changed back to the Telstra Clear servers.

When the device is turned the power light is solid - the other two lights flash for 10 minutes then go out. That suggests to me that it can't establish the VPN and gives up, but I'm only guessing.

We've tried waiting for several hours (days in fact) for it to do it's thing.

Obviously a lot of time with your help desk trying to sort this out, but no luck so far. It would be great if you have any suggestions.

johnr

19282 posts

Uber Geek
+1 received by user: 2526
Inactive user

#870309 1-Aug-2013 20:54

Are you in Wellington, Could you lend your Sure Signal unit to Steve Biddle to test?

Unit could be faulty

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#870330 1-Aug-2013 21:19

mclean: Yes I've studied the help page. I must admit I don't fully understand it. First of all it says the Sure Signal must have a DHCP assigned IP address so it's routeable to over the internet. My router has a static IP, which I understand it has to have on the cable network, so I'm not sure if I need to change something here. Your techs said I should leave it a it is.

This means you need DHCP enabled on your local LAN. Your WAN connection on cable is a a static IP address.

mclean

584 posts

Ultimate Geek
+1 received by user: 182

Subscriber

#870474 2-Aug-2013 09:11

johnr: Are you in Wellington, Could you lend your Sure Signal unit to Steve Biddle to test?

Thanks for that suggestion. I have PM'd Steve directly - will post the outcome if we make any progress.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

mclean

584 posts

Ultimate Geek
+1 received by user: 182

Subscriber

#878822 15-Aug-2013 14:13

After an EPIC struggle with the help desk and two Sure Signal devices later, I finally struck someone who had it sorted in 5 minutes (and kindly sent me a replacement router for testing). Then it was simple plug-and-play as advertised. The whole household is switching to Vodafone mobiles!

I did a firmware upgrade on the original router and it also worked fine. Nothing wrong with the Sure Signal. Just disappointed we couldn't pin-point what was wrong with the original setup.

John & Steve: Thanks for the help.

antoniosk

2382 posts

Uber Geek
+1 received by user: 742

ID Verified

Trusted

Lifetime subscriber

#878856 15-Aug-2013 14:50

mclean: After an EPIC struggle with the help desk and two Sure Signal devices later, I finally struck someone who had it sorted in 5 minutes (and kindly sent me a replacement router for testing). Then it was simple plug-and-play as advertised. The whole household is switching to Vodafone mobiles!

I did a firmware upgrade on the original router and it also worked fine. Nothing wrong with the Sure Signal. Just disappointed we couldn't pin-point what was wrong with the original setup.

John & Steve: Thanks for the help.

So for the benefit of the community, what was the problem?

________

Antoniosk

mclean

584 posts

Ultimate Geek
+1 received by user: 182

Subscriber

#878932 15-Aug-2013 16:10

antoniosk: So for the benefit of the community, what was the problem?

All I know is that the router firmware upgrade fixed it. There's no visible changes in the settings before and after the upgrade, and no clue in rev notes for the firmware. All I can suggest is that if the Sure Signal can't establish the VPN then a good thing to try is another router.

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41025

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#879524 16-Aug-2013 13:53

Hmmm. Similar thing here. I just plugged in a Sure Signal and I can see outgoing connections to the Vodafone IP address but after 45 minutes both indicators are now off.

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.