[WXC/VFX] PAP2T Doesnt re-register

Forums › One NZ (including Farmside) › [WXC/VFX] PAP2T Doesnt re-register

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#15755 6-Sep-2007 20:08

I am still having problems with my PAP2T occasionally not re-registering after an ADSL outage. I have to power cycle my WAG54G to get things going again.

I have given the PAP2T a fixed IP address which helped but was not the complete solution.

The problem still occurs maybe once every 2 or 3 months, just enough that I can never completely rely on the VFX line and my wife is not impressed when she can’t ring her mother.

Would a fixed IP with Xnet help with recovery from an outage?

maverick

3594 posts

Uber Geek
+1 received by user: 80

Trusted

WorldxChange

#85686 7-Sep-2007 06:20

Hi Michael

If you could run a test for me please, once the PAP2T is up just disconnect the DSL line and wait 1 or 2 minutes until the Phone light disappears, then reconnect the DSL and see if the PAP2T reconnects should happen within 2 - 3 minutes if you can do this 2 or 3 times to see if you get an intermittent result.

Let me know what the outcome is and depending on the result I may make a slight change to something in your config.

Oh one last thing do you have the latest firmware for your WAG ? and in answer to your question would a fixed IP help the answer is possibly but won't be able to decide that until we look at a couple of things first.

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#85856 8-Sep-2007 17:12

Well I disconnected the telecom line out of the wag54g 4 times last night and the pap2t re-registered every time. These things never happen when you want them to. The wag54g firmware is 1.02.20.

Michael

maverick

3594 posts

Uber Geek
+1 received by user: 80

Trusted

WorldxChange

#85867 8-Sep-2007 17:33

hmmm hate that .... as a suggestion the next time you go out disconnect the dsl line and reconnect it when you get home, that way we will see if it's a time related issue.

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#85951 9-Sep-2007 13:18

This used to happen after an outage when I was using Woosh DSL however since we changed to xnet it hasnt happened once. Nice.

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#85952 9-Sep-2007 13:28

I left the ADSL line out for about 5 hours. As soon as I plugged it back in the pap2t re-registered 30 seconds later, sigh

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#86034 10-Sep-2007 05:45

The pap2t was in the 30 second re-register cycle again this morning. There seems to have been quite a lot a ADSL outages recently.

AliExpress

Shop now on AliExpress (affiliate link).

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#86692 14-Sep-2007 14:46

I'm begining to think the WAG54G is marginal. Somtimes when I turn on the power to the computers it disconnects. What would be a good replacment?

Niel

3267 posts

Uber Geek
+1 received by user: 80

Trusted

#86711 14-Sep-2007 19:16

How much do you want to spend? Do you need ADSL2+ now or in the future (i.e. near exchange and not rural?

You can never have enough Volvos!

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#86713 14-Sep-2007 20:00

Niel: How much do you want to spend? Do you need ADSL2+ now or in the future (i.e. near exchange and not rural?

$200-$300, ADSL2+ would be good, I am near the exchange which is changing over soon.

Niel

3267 posts

Uber Geek
+1 received by user: 80

Trusted

#86809 15-Sep-2007 19:26

WAG54GP2 v2 (look for VFX sticker on box, otherwise old model). Apparently there is also a new box coming out pre-printed with VFX on it instead of a sticker, which will be even better because you will know it is brand new stock and not old stock. Can get it around $230 if you shop around. Then sell your PAP2T on TradeMe for $60 to $90. It is so much easier having everything in one box, and less power adapters. No f*rting around with setting op different boxes with their IP addresses and different config screens. You'll have one system that was built to work together. I have the modemless version WRTP54G and it works really well. None of that having to reboot every time you change a setting, it simply applies settings as you would expect it to (except some security settings). I am told the call quality is also better than the PAP2T, but not confirmed. Should be, since (only) the PAP2T is no good for faxing.

You can never have enough Volvos!

chchmjr

66 posts

Master Geek
+1 received by user: 2

ID Verified

Lifetime subscriber

#86862 16-Sep-2007 21:10

Thanks for that.

Michael