Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Forums › One NZ (including Farmside) › [WXC/VFX] New Firmware for the Linksys AM300
joshp

205 posts

Master Geek
+1 received by user: 1

Trusted
WorldxChange

#19874 4-Mar-2008 13:49
Send private message

Hi All,

We have just been forwarded some new firmware by Linksys for the AM300, it is due to appear on the official Linksys website shortly but until then you can get the firmware from the below address:

http://58.28.20.69/firmware/AM300v1-EU-AnnexA-v1.19.04-code.zip

Cheers

Josh




http://wxc.co.nz

Create new topic
MrChairman
26 posts

Geek


  #114737 5-Mar-2008 00:34
Send private message

I take it this resolves the whole gateway being on a different subnet issue?



maverick
3594 posts

Uber Geek
+1 received by user: 80

Trusted
WorldxChange

  #114746 5-Mar-2008 06:12
Send private message 

Linksys, A division of Cisco Systems, Inc.
Product:                AM300 (Annex A)
Classification:         Firmware Release History
Release Date:           02/04/2008
Firmware Version:      1.19.04
________________________________________________________________________
Firmware V1.19.04 - 02/04/08
- TI Datapump v7.2.3.0
- Resolves issue with LAN Subnet when using PPP Half Bridge
- Resolves issue with PPPoE connection failure when client receives PPPoE-Session packets before receiving PADS.
 Firmware V1.19.02 - 07/23/07
- TI Datapump v7.2.3.0
- Adds device configuration backup & restore feature
- Adds ability to retain device configuration after firmware upgrade (from v1.19.02 on)
- Resolves issue with incorrect Gateway IP address when using PPP Half Bridge
- Resolves issue with Local DHCP server enabled when PPP Half Bridge is enabled
- Resolves issue with Daylight Savings Time adjustment
- Resolves issue with UPnP Discovery
- Resolves issue with Port Forwarding failure after WAN IP change
 Firmware V1.19.00 - 02/28/2007
- TI Datapump v6.0.2.0
- Adds ability to disable NAT
- Adds PPP Half Bridge
- Adds PVC connection status to UI
- Adds ability to Autodetect for VPI/VCI
- Supports Windows Vista 32-bit and 64-bit
- Resolves issue with Local DHCP server disable in Bridged Only Encapsulation
- Resolves issue with UPnP interoperability with Windows Vista
- Resolves issue with device reboot when opening routing table
- Resolves issue with PPPoE negotiation fail
 Firmware V1.09
- Initial Release
 Notes: 
- Not for use with -S4 or Annex B Models




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications

Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Updates »

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.








RSS feeds
Main feed
Forums feed
Copyright
©2002-2026 Geekzone®
Site features
Geekzone BI dashboard
Geekzone Badges
Geekzone Status Page

 

Site Information
Subscribe to Geekzone
Privacy Statement
Forum Usage Guidelines (FUG)
Advertising
Trademark and copyright