Vodafone TV with EdgeRouter POE

Forums › One New Zealand (including Vodafone, WxC, Farmside) › Vodafone TV with EdgeRouter POE - questions...

uluxus

265 posts

Ultimate Geek

#198901 27-Jul-2016 19:19

I've managed to stumble my way through VLAN DHCP UFB setup, then followed this guys rules here:

http://www.geekzone.co.nz/forums.asp?forumid=40&topicid=181158#1401797

Seems to work perfectly, have two Vodafone TV's running and Speedtest still nets 102/22 MBps. (didn't test without the rules)

I have the following connected to the Edgerouter:

ETH0: Chorus ONT

ETH1: Server

ETH2: Vodafone TV 1

ETH3: Vodafone TV 2

ETH4: Ubiquiti AP AC LR (2x iPhones, 2x Amazon Fire TV's, 1x Laptop, 1x XBO)

I now have the issue of trying to access network content from the Fire TV's now they are on separate LAN's.

What's the simplest way to get the two communicating? Bridging seems to be frowned upon.

PeterReader

6018 posts

Uber Geek

Trusted

Geekzone

Lifetime subscriber

#1599664 27-Jul-2016 19:19

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

If you are posting regarding DSL speeds please check that

you have reset your modem and router
your PC (or other PCs in your LAN) is not downloading large files when you are testing - you are not being throttled by your ISP due to going over the monthly cap
your tests are always done on an ethernet connection to the router - do not use wireless for testing
you read this topic and follow the instructions there.

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

Your ISP and plan
Type of connection (ADSL, ADSL2, VDSL)
Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin)
Your general location (or street)
If you are rural or urban
If you know your connection is to an exchange, cabinet or conklin
If your connection is to a ULL or wholesale service
If you have done an isolation test as per the link above

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

I recommend you read these two blog posts:

I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.

These links are referral codes: Sharesies | Mighty Ape

uluxus

265 posts

Ultimate Geek

#1599713 27-Jul-2016 20:11

Interestingly/disappointingly both TV's stopped working...

Here's my config if anyone is able to help.. http://pastebin.com/aU2b68JH

Relevant changes:

protocols {
igmp-proxy {
interface eth0.10 {
alt-subnet 203.167.247.45/32
role upstream
threshold 1
}
interface eth2 {
alt-subnet 192.168.2.0/24
role downstream
threshold 1
}
interface eth3 {
alt-subnet 192.168.2.0/24
role downstream
threshold 1
}
}
}

rule 21 {
action accept
description iptv
destination {
address 0.0.0.0/0
}
log enable
protocol udp
source {
address 203.167.247.45/32
}
}
rule 22 {
action accept
description iptv2
destination {
address 224.0.0.1
}
log enable
protocol igmp
source {
address 10.0.0.2
}
}