[WXC/VFX] 802.11n and vfx

Forums › One NZ (including Farmside) › [WXC/VFX] 802.11n and vfx

hamistheman

82 posts

Master Geek
+1 received by user: 7

#19983 8-Mar-2008 20:45

Hi all,

I am currently a xnet customer.

I was wondering if anyone has heard of/had experience with a device that has 802.11n and phone ports that would work with the VFX service?

Cheers,
Hemant

tonyhughes

Hawkes Bay
8476 posts

Uber Geek
+1 received by user: 6

Retired Mod

Trusted

Lifetime subscriber

#115463 8-Mar-2008 20:56

I havent seen anything.

You can hang an N-capable AP or router off the back of any other unit though, just be aware of double-NAT etc.

Niel

3267 posts

Uber Geek
+1 received by user: 80

Trusted

#115464 8-Mar-2008 21:05

Hemant, note that only the VFX approved hardware can be used for VFX. The only ones that can be used are the ones on the VFX hardware page (except for one that is not yet on the hardware page). You can not use any other hardware for VFX. If you find a Linksys device that is not yet approved, then feel free to request that WxC consider approving it (however, they probably would already know about it).

You can never have enough Volvos!

hamistheman

82 posts

Master Geek
+1 received by user: 7

#115478 8-Mar-2008 22:23

Hi Niel,

Thanks for the speedy reply :).

It is because of the issues you mentioned that I was trying to keep it in one device.

I've had look and have been unable to find any Linksys Device that has everything in it. I'll try contacting them to find out if they plan to develop such a product.

Thanks again for your help.

Cheers
Hemant

hamistheman

82 posts

Master Geek
+1 received by user: 7

#115479 8-Mar-2008 22:24

Hi Again,

I forgot to thanks Tony as well.... so thanks Tony :)

Hemant