[WXC/VFX] Digital Phone

Forums › One NZ (including Farmside) › [WXC/VFX] Digital Phone

jozef

9 posts

Wannabe Geek

#21744 5-May-2008 21:38

Hi,
sorry if there is straight answer to my question and I didn't spotted anywhere...
Is it possible to use only digital telephone with WXC, like the Linksys SPA922 or other brands similar to this model.
I would rather not use analoge phone, just connect the phone directly to Ethernet port, and have 2 phone numbers (2 didgital phones)
Is this possible?
Thank you
Jozef

coffeebaron

6319 posts

Uber Geek
+1 received by user: 3581

Trusted

Lifetime subscriber

#128685 5-May-2008 21:52

Yes, absolutely. The SPA922 / 942 / 962 are all VFX compatible. I use the SPA942 as my home office line, and call quality is definitely superior to VFX though an ATA. The only downside at the moment, is there is no DECT cordless version of such phones - yet. See hardware list:
http://www.xnet.co.nz/vfx/hardware.shtml

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

jozef

9 posts

Wannabe Geek

#128727 6-May-2008 09:23

So does this means, that the SPA922 could be connected stright to my ADSL router-modem, without addtional hardware like PAP2T or SPA2102? As I underswtand, those are required for analog phones, SPA922 will have own MAC address and such will not require the addtional devices, please confirm.
Thank you
Jozef

SamF

1598 posts

Uber Geek
+1 received by user: 252

Trusted

#128731 6-May-2008 09:30

How about other Linksys IP Phones like the SPA901?

Is ANY Linksys VOIP product able to be attached to the VFX network, or only those that WXC say we can??

joshp

205 posts

Master Geek
+1 received by user: 1

Trusted

WorldxChange

#128745 6-May-2008 10:46

Hi Guys,

Just to answer those questions..

The 922, 942 or 962 are able to be connected via ethernet, so as you point out this is without the need to use an ATA.

We only support the devices listed on our hardware page with our VFX/DVX services. If you put other phones in behind something like the Epigy Quadro or Asterisk box etc, you can use what ever hardware you desire, but we will only directly connect with our listed supported devices.

Cheers

Josh

http://wxc.co.nz