Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Tockly

346 posts

Ultimate Geek


#21764 6-May-2008 13:33
Send private message

I am trying to install Trixbox at home and I think I have set everything up correctly but when I try and dial I get "All circuits are busy" message.

And my config looks like:

allow=ulaw&alaw
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromdomain=as.wxcnz.net
fromuser=4831xxxx
host=as.wxcnz.net
insecure=invite,port
nat=yes
secret=****************
type=peer
context=from-trunk
username=***************

Not sure where I am going wrong.

Any suggestions?

Chris




 


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
sbiddle
30853 posts

Uber Geek

Retired Mod
Trusted
Biddle Corp
Lifetime subscriber

  #128790 6-May-2008 13:39
Send private message

Do you have an outbound route set and a dialplan?




Tockly

346 posts

Ultimate Geek


  #128792 6-May-2008 13:45
Send private message

Sure do....

Outbound using VFX Trunk

and

9|NXXXXXX

That look ok?




 


tonyhughes
Hawkes Bay
8476 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

  #128799 6-May-2008 13:53
Send private message

Have you altered your host file ?









sbiddle
30853 posts

Uber Geek

Retired Mod
Trusted
Biddle Corp
Lifetime subscriber

  #128800 6-May-2008 14:02
Send private message

Tockly: Sure do....



Outbound using VFX Trunk



and



9|NXXXXXX

That look ok?


You realise this means you have to dial 9 to access an outside line? You're not just trying to dial a 7 digit local number directly?



Tockly

346 posts

Ultimate Geek


  #128801 6-May-2008 14:03
Send private message

Yes added:

58.28.20.150 as.wxcnz.net




 


Tockly

346 posts

Ultimate Geek


  #128805 6-May-2008 14:11
Send private message

Yup have been dialing 9 first then my home number.

Just changed the dial plan to remove the 9 and am now getting "your call cannot be completed as dialed"

The dial plan is now:

NXXNXXXXXX
NXXXXXX

If I dial 04 529xxxx I get the aove error

but if I dial 529xxxx I get the all circuits error




 


tonyhughes
Hawkes Bay
8476 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

  #128806 6-May-2008 14:12
Send private message

Try

9|.

And see how it goes...







 
 
 

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.
Tockly

346 posts

Ultimate Geek


  #128808 6-May-2008 14:14
Send private message

Back to "all circuits....."




 


tonyhughes
Hawkes Bay
8476 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

  #128811 6-May-2008 14:41
Send private message

Did you follow a guide when setting TB up?
Have you ever successfully had this particular installation of TB successfully making a call with any other provider?







Tockly

346 posts

Ultimate Geek


  #128812 6-May-2008 14:43
Send private message

Yes followed the guide

And No I only have one provider, so haven't tried any others.

C




 


tonyhughes
Hawkes Bay
8476 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

  #128813 6-May-2008 14:44
Send private message

  • Click on ‘Trunks’ in the sidebar
  • Click on ‘Add a SIP trunk’
  • Outbound caller ID: (e.g. 091234567)
  • Never Override CallerID: Tick this
  • Maximum channels: 2 (VFX allows 2 simultaneous calls)
  • Trunk name: VFX 1 (Can be anything you want)

  • PEER details:


allow=ulaw&alaw

canreinvite=no

context=from-trunk

disallow=all

dtmfmode=rfc2833

fromdomain=as.wxcnz.net

fromuser=9xxxxxxx ;this is your VFX number with no leading zero

host=as.wxcnz.net

insecure=invite,port

nat=yes

secret=PASSWORD ;that VFX gave you when you phoned and got switched to VFX Asterisk platform

type=peer

username=AuthID ;from VFX as above


  • USER context: AuthID
  • USER details: (leave empty)
  • Register string: yourVFXNumber:PASSWORD:AuthID@as.wxcnz.net/yourVFXNumber

(YourVFXnumber = 9xxxxxxx -no leading zero)

(Password/AuthID from the new details WxC gave you - definitely not your VFX website login details).








tonyhughes
Hawkes Bay
8476 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

tonyhughes
Hawkes Bay
8476 posts

Uber Geek

Retired Mod
Trusted
Lifetime subscriber

  #128815 6-May-2008 14:48
Send private message

Tockly: Yes followed the guide

And No I only have one provider, so haven't tried any others.

C

Which guide? Mine? Someone else?

This guide (not for VFX) tells you how to set up a Gizmo trunk. Gizmo is free to sign up to, and doing so might shed light on where your problem lies (i.e. Gizmo works fine, your VFX settings are up the duff, Gizmo no work, then Trixbox or your network might be at fault).







Tockly

346 posts

Ultimate Geek


  #128816 6-May-2008 14:50
Send private message

Will give that one a go...

Back soon




 


joshp
205 posts

Master Geek

Trusted
WorldxChange

  #128828 6-May-2008 15:25
Send private message

Hi Tockly,

there is another forum with a similar issue, try setting the disallow=all BEFORE the allow=ulaw&alaw this has fixed it for the other user:

http://www.geekzone.co.nz/forums.asp?ForumId=65&TopicId=21742&page_no=2


Cheers

Josh




 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.