[WXC/VFX] VFX has just stopped working

Forums › One NZ (including Farmside) › [WXC/VFX] VFX has just stopped working

conork

31 posts

Geek
+1 received by user: 1

#21928 11-May-2008 15:18

I have just moved my wrtp54g router to the other side of the room, wireless is back up now but the vfx phone has now stopped working, no dial tone at all. and i have forgotten the password to get into that part of the router setup. it is all plugged in fine as have double checked it. and internet is working fine.
Any suggestions??

TIA

conor

conork

31 posts

Geek
+1 received by user: 1

#130075 11-May-2008 21:05

Does anyone know what the password is to get to the admin part of the voice section of the router?
cheers

scottjpalmer

6032 posts

Uber Geek
+1 received by user: 790

Moderator

ID Verified

Trusted

Lifetime subscriber

#130076 11-May-2008 21:19

If it's anything like my device, once WxC has provisioned it you can't access that part, it should just work. Maybe try hardresetting the router and re-provisioning it?

Plx

51 posts

Master Geek
+1 received by user: 2

#130097 11-May-2008 22:23

From memory, once it's been provisioned you can't get in to the voice admin section.

Niel

3267 posts

Uber Geek
+1 received by user: 80

Trusted

#130109 11-May-2008 22:47

The only way to get back into the voice section is to cancel VFX and then they will unlock it for you. It stops you from accidentally messing up the settings.

You can never have enough Volvos!

jesseycy

294 posts

Ultimate Geek

#130114 11-May-2008 23:14

Or you cam press "factory reset", which would also reset all settings in your device...

Niel

3267 posts

Uber Geek
+1 received by user: 80

Trusted

#130167 12-May-2008 10:24

jesseycy: Or you cam press "factory reset", which would also reset all settings in your device...

It does not work on all devices, on some it only resets the modem and/or router settings.

You can never have enough Volvos!