[WXC/VFX] Anyone using a Linksys SPA-1001 single-port ATA on VFX?

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] Anyone using a Linksys SPA-1001 single-port ATA on VFX?

boredwild

20 posts

Geek

#26651 29-Sep-2008 15:58

Just wondering if this model is supported, even if not officially.

Thanks

kfella2000

495 posts

Ultimate Geek

#167885 30-Sep-2008 05:55

If no-one answers and says yes they are using one I would say if its got a mac address on it give Xnet a ring and see if it can still be used with VFX. I did a google on it and one site I went to said that it was discontinnued and replaced with the PAP2T.

coffeebaron

6236 posts

Uber Geek

Trusted

Lifetime subscriber

#167931 30-Sep-2008 10:15

The SPA-1001 is an older device and has never been approved for VFX.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

boredwild

20 posts

Geek

#167946 30-Sep-2008 10:57

This is a smug reply and does not even attempt to answer the question as asked. I understand that it is not an "approved" device. However, that is not to say that it is not supported; perhaps it will provision the same as a PAP2. I have no idea, and I'm wondering if anyone here does.

coffeebaron

6236 posts

Uber Geek

Trusted

Lifetime subscriber

#167970 30-Sep-2008 12:33

boredwild: This is a smug reply and does not even attempt to answer the question as asked. I understand that it is not an "approved" device. However, that is not to say that it is not supported; perhaps it will provision the same as a PAP2. I have no idea, and I'm wondering if anyone here does.

As I don't work for WxC (although I am one of their dealers) I can't give you a fully authoritive answer. However, they will only provision their tested and approved hardware. The SPA-1001 is not on that list.

Rural IT and Broadband support.

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

boredwild

20 posts

Geek

#167976 30-Sep-2008 12:58

Thanks. I understand that this model is not on their list. However, I ran a PAP2 (not a PAP2T) for a year, and it provisioned and ran fine. That is why I am enquiring about another Linksys device; it may provision just fine. Has anybody tried one?

Javahn

13 posts

Geek

#555350 8-Dec-2011 10:09

Anyone ever configure a SPA1001 correctly to work on Xnet's Open VFX???

Zeon

3918 posts

Uber Geek

Trusted

#555355 8-Dec-2011 10:18

You can always use OpenVFX but they won't provide all the auto provisioning to your device like they do with approved devices.

Speedtest 2019-10-14

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

Javahn

13 posts

Geek

#555361 8-Dec-2011 10:27

RATS lol