[WXC/VFX] X-Lite on Open VFX

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] X-Lite on Open VFX

jonathanreid

24 posts

Geek

#67077 27-Aug-2010 17:04

I have just converted one of my VFX numbers to Open VFX and am trying to get X-Lite to work.

X-Lite registers and I can make outgoing calls. Incoming calls however go straight to voicemail so I assume there is a problem with incoming communications.

My router/modem is a AG310 (which is also running another VFX line) and I have tried turning off SIP ALG and port forwarding 5060/5061 but it does not seem to help.

In the X-Lite debug log it does seem to create an entry when the incoming call occurs but no useful info (just a warning RESIP:STATS .....)

Any ideas on where to go next to debug/fix the problem ?

Thanks !

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#373675 27-Aug-2010 17:11

Most likely a nating issue as your details will be correct since your making outbound calls, the inbound calls will probably getting blocked at the SIP level, do you have stun enabled ?

If not try using this setting, stun.wxnz.net and see how you go, send me a PM with your details if still an issue and I will take a look and see hat is happening

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

Sharesies

Trade NZ and US shares and funds with Sharesies (affiliate link).

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#373691 27-Aug-2010 18:06

You have a 922 as well trying to register with the same Phone number, did a quick update for you , inbound calls are all working okay now, but best to turn the spa922 off

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

freitasm

BDFL - Memuneh
78924 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#373693 27-Aug-2010 18:16

maverick: You have a 922 as well trying to register with the same Phone number, did a quick update for you , inbound calls are all working okay now, but best to turn the spa922 off

Ok, I might be a bit blunt, perhaps being Friday evening and all, but... Seriously folks, if you ask for an open configuration make sure you know what you are doing, or at least make sure you eliminate all possibilities of things going wrong...

That's why until now VFX was "closed".

</end blunt comment>

My technology disclosure

jonathanreid

24 posts

Geek

#373697 27-Aug-2010 18:23

Thanks for that, the SPA was the old device I converted from which appeared dead, obviously not.

I will allow blunt comments just this once since it is Friday and all, and an embarrassing oversight :)

freitasm

BDFL - Memuneh
78924 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#373698 27-Aug-2010 18:24

Pheew, I am off the hook.

Good job...

My technology disclosure