[WXC/VFX] VFX - SIP 404

Hi everyone

After a long process of getting migrated across to OpenVFX, I am having issues registering with FreeSWITCH behind NAT using UDP.

------------------------------------------------------------------------
send 585 bytes to udp/[58.28.20.150]:5060 at 02:57:12.803950:
------------------------------------------------------------------------
REGISTER sip:pan.wxnz.net SIP/2.0
Via: SIP/2.0/UDP 210.185.xxx.xxx;rport;branch=z9hG4bKBrvt3t2Nrap3e
Max-Forwards: 70
From: sip:07846xxxx@pan.wxnz.net;transport=udp;tag=Br9S63j37UpND
To: sip:07846xxxx@pan.wxnz.net;transport=udp
Call-ID: 8a131241-e0d7-4e1e-9ccd-3d18a35d1a27
CSeq: 6546052 REGISTER
Contact: sip:gw+OpenVFX@210.185.xxx.xxx:5060;transport=udp;gw=OpenVFX
Expires: 3600
User-Agent: FreeSWITCH-build.iCE
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, UPDATE, INFO, REGISTER, REFER, NOTIFY
Supported: timer, precondition, path, replaces
Content-Length: 0

------------------------------------------------------------------------
recv 330 bytes from udp/[58.28.20.150]:5060 at 02:57:12.831950:
------------------------------------------------------------------------
SIP/2.0 404 Not found
From: sip:07846xxxx@pan.wxnz.net;transport=udp;tag=Br9S63j37UpND
To: sip:07846xxxx@pan.wxnz.net;transport=udp;tag=302289348-1293764241911
Call-ID: 8a131241-e0d7-4e1e-9ccd-3d18a35d1a27
CSeq: 6546052 REGISTER
Via: SIP/2.0/UDP 210.185.xxx.xxx;branch=z9hG4bKBrvt3t2Nrap3e;rport=5060
Content-Length: 0

From my limited knowledge, I definitely shouldn't be getting the SIP 404 :-O

This is my config file (with obvious omissions):

Username: 07846xxxx
Auth-Username: AuthUser (supplied in email)
Password: AuthPassword (supplied in email)
Proxy: pan.wxnz.net
Realm: pan.wxnz.net
Register-Transport: UDP

Some help would be appreciated, thanks! :-)

jourdant

maverick