[WXC/VFX] Trying to setup open VFX with Grandstream 502 ATA

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] Trying to setup open VFX with Grandstream 502 ATA

CapinNeemo

11 posts

Geek

#76920 8-Feb-2011 20:18

Hi i got sent this ATA as the wireless IP phone i have locks up intermittently witch is pretty painful.

I have been trying to setup this ATA but cannot get it to register i assume i have some setting wrong somewhere but don know what i´ve done wrong I´ve attached a screen shot of my settings .
User settings

Thanx in advance

Jono

CapinNeemo

11 posts

Geek

#436978 8-Feb-2011 20:19

https://cdn.geekzone.co.nz/imagessubs/a683d4055da0d4188585481bb25c067f.jpg

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#436979 8-Feb-2011 20:25

Primary SIP server is wrong for a start.

I wouldn't expect much from this device, Gransstream make a lot of junk. The only product I've ever used that was any good was the GXP3140, but even that had buggy firmware.

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#437097 9-Feb-2011 05:57

take out the OBP setting pan.wxnz.net and put that into the SIP server, stun.wxnz.net is a STUN server and is used for NAT translation in the sip messaging. if you have issues with the box not receiving calls it will be to do with your natting or firewall, best advice is to set a static IP for your box.

also change your DTMF method to RFC2833,

Also please make sure you have the most up to date firmware

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications

maverick

3594 posts

Uber Geek

Trusted

WorldxChange

#437107 9-Feb-2011 07:07

Also would be wise to remove the screen shot as it has your userid / phone number and auth details there sitting in a public domain, 2 out 3 details required to access the network....

Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

https://www.facebook.com/wxccommunications