If it offer native IPv6 connectivity it probably will work - may aswell try it as its free to go on the trial. One thing that I haven't figured about IPv6 on a PPP session is that you probably will need to input your LAN side range as I'm not sure if this info is given as part of info sent to your router when you establish PPP?
I don't think PPP half bridge mode would work, wrong layer. I've setup 3 Cisco 877's to use V6 on xnet and they've worked sweet as, but I don't believe Half bridge would work.. You'd need full PPPoE or PPTP relay for that to work,.
kyhwana2: I don't think PPP half bridge mode would work, wrong layer. I've setup 3 Cisco 877's to use V6 on xnet and they've worked sweet as, but I don't believe Half bridge would work.. You'd need full PPPoE or PPTP relay for that to work,.
He;'s not using half bridge though? These are all in one units with modems built in?
Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly
to your computer or smartphone by using a feed reader.