can receive inbound but cannot make outbound calls

Forums › VoIP › can receive inbound but cannot make outbound calls

Platinum888

18 posts

Geek

#103392 6-Jun-2012 11:55

Dear Experts.

I am facing a problem with FreePBX server with iTalk Voip Installed.

just wander any one here can help me?

I can receiveinbound but cannot make a outbound calls., once I press 9 then the following number and server always say the socket is busy now please call again later now, or i can reach to iTalk server and ask me press my password, once I enter password it cutoff after pin enter.

Trunk Name: italk
disallow=all
allow=ulaw&g729
canreinvite=no
context=from-trunk
dtmfmode=rfc2833
fromuser=64997xxxxx
host=akl.italk.co.nz
insecure=very
secret=
type=friend
username=64997xxxxx

in Outbound Routes
Dial Patterns
9|*
NXXNXXXXXX
NXXXXXX

philelvey

104 posts

Master Geek

#636624 6-Jun-2012 12:52

Is the trunk registering, or are you using SIP peering?

Reluctant geek

Platinum888

18 posts

Geek

#636632 6-Jun-2012 13:10

Yes.. it stay registed.

incoming call is fine.

outgoing call can reach to iTalk server asked me enter my password once I enter the password it disconnected itself.

extension call extension all fine.

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#636634 6-Jun-2012 13:12

I assume you have paid and installed a G.729 codec if you're going to use G.729?

Is there any reason why you want to use 9 as a predigit? This makes things confusing for people as it's not a common predigit in NZ, and a predigit isn't even needed in the VoIP world.

Platinum888

18 posts

Geek

#636635 6-Jun-2012 13:13

sorry I am using SIP Trunk

Platinum888

18 posts

Geek

#636646 6-Jun-2012 13:20

i am using outbound dial prefix i am a number of phone number to be install.

disallow=all
allow=ulaw&g729
canreinvite=no
context=from-trunk
dtmfmode=rfc2833
fromuser=649974xxxx
host=akl.italk.co.nz
insecure=very
secret=<my password>
type=friend
username=649974xxxx