Can't receive calls 2talk and Innbox v50u modem

Forums › VoIP › Can't receive calls 2talk and Innbox v50u modem

HowickDota

427 posts

Ultimate Geek
+1 received by user: 72

#116720 7-May-2013 20:31

Hi,

My router is an innbox v50u with 2 ports for telephones, the phones are able to make calls but I am unable to receive them. I've tested the sip settings with an android app and the 2talk softphone and it works fine which leads me to believe it may be an issue with the router OR the handset.

The handset is a Uniden Elite 9035+1 withn rj11-rj11 cord running from the base to the router's telephone port.
Here is the settings page:

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#813251 7-May-2013 20:43

Any reason why you have a tick next to SIP Registrar but have 0.0.0.0 in there? If you're going to tick these it'd pay to put something in there.

These aunits look they use the same SIP stack to the Netcomm devices which is average at best.

HowickDota

427 posts

Ultimate Geek
+1 received by user: 72

#813270 7-May-2013 20:56

I'm not sure which registrar settings to use. And if you untick it then it will become like that with those values, it wont stay "unticked" as such.

myfullflavour

896 posts

Ultimate Geek
+1 received by user: 382

Trusted

Full Flavour

#813275 7-May-2013 20:57

Give our help desk a buzz tomorrow AM - we configure VoIP on these all the time.

HowickDota

427 posts

Ultimate Geek
+1 received by user: 72

#813278 7-May-2013 20:59

Thanks

sheldonlendrum

Sheldon
120 posts

Master Geek
+1 received by user: 28

Lifetime subscriber

#813281 7-May-2013 21:05

Try set the port to 50600 rather than 5060

Sheldon Lendrum
@SheldonLendrum
http://www.inboxdesign.co.nz/

UFF Speedtest

coffeebaron

6304 posts

Uber Geek
+1 received by user: 3567

Trusted

Lifetime subscriber

#813282 7-May-2013 21:06

Put the same settings as the above in there too.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

AliExpress

Shop now on AliExpress (affiliate link).

Llory

25 posts

Geek
+1 received by user: 1

#816755 13-May-2013 14:13

Remove "SIP Domain Name".

Your Settings or anyone should be as follows.
1.SIP Domain Name = NULL / None / Empty Field .
2. Dial Plan = Add |111|*xx| at the end for 2talk voicemail and Emergency .
3. SIP Proxy = sip.2talk.co.nz (port :5060)
4. SIP OutBound Proxy = sip.2talk.co.nz (port :5060)
5. SIP Registrar = sip.2talk.co.nz (port :5060)
6. Extension / Displayname / Authentication Name = Your 2talk number e.g 028xxxxxxx
7. Apply
8. Also Check Global Parameters that you have assigned the Voice Interface to your WAN interface not LAN, Select "Any_Wan" if unsure.