Hi All

I am having a tinker trying to get a Cisco 7960 to work with 2 talk

My setup:

ERL lite

Cisco 7960 P0S3-8-12-00 firmware

I have a cisco SPA112 already working with the 2talk logon details and also have got the Cisco 7960 able to register and working with another voip provider (VOIPcheap.com)

Once I got this working, all I did then was update the 2talk sip address, username and password etc to the config files

I dont think its firewall or NAT??? and I've check auth name and password for incorrect typos,

I turned on debugging and compare the logs to the successful logon vs unsuccessful

This is the diffs in the unsuccesful

[15:09:08:103370] SIPProcessUDPMessage: recv UDP message from <27.111.14.65>:<50195>, length=<471>, message=

[15:09:08:103371] SIP/2.0 403 Forbidden

Via: SIP/2.0/UDP 192.168.1.108:5060;branch=z9hG4bK04ddc3b9;received=192.168.1.108;rport=5060

From: <sip:2talk@sip.2talk.co.nz>;tag=00164757c64e0014695a5256-79b59af7

To: <sip:2talk@sip.2talk.co.nz>;tag=as26d12505

Call-ID: 00164757-c64e0002-478a7691-7ce27d6a@192.168.1.108

CSeq: 138 REGISTER

Server: 2talk PBX

Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE

Supported: replaces

Content-Length: 0

[15:09:08:103374] sipSPICheckResponse: Response match: callid=00164757-c64e0002-478a7691-7ce27d6a@192.168.1.108, cseq=138, cseq_method=REGISTER

[15:09:08:103377] %E640 REG msg unsupported: in 403, request failure

So close yet so far....