2Talk Cisco SPA112 Auto provisioning

Forums › VoIP › 2Talk Cisco SPA112 Auto provisioning

backwards

29 posts

Geek
+1 received by user: 3

#205884 30-Nov-2016 23:27

Has anyone managed to get the auto provisioning to work for the Cisco ATA SPA112 or 122 devices of late?

Followed all the instructions here and nothing seems to work. https://live.2talk.co.nz/provisioning/ciscospa122-guide.html

I have six of these to configure and was really hoping to not do this manually.

I've also made sure that the correct mac addresses and internal IP's have been configured in 2Talk live.

Cheers

Spong

1016 posts

Uber Geek
+1 received by user: 341

Trusted

#1680382 30-Nov-2016 23:38

I tried many times to use the 2Talk auto-provision system on my SPA112 about a year ago without success. I contacted 2Talk support and they admitted it was broken. Would have saved a heap of time if they'd mentioned this on their site. More research showed that other Geekzoners had wasted time trying this also.

In the end I went through the very laborious process of manual configuration using the settings on their site, and then saved the configuration for recovery in the future.

Tivo upgrades to operate with the new OzTivo EPG, support and service. Over 400 performed here so far. See: www.hillcrest.net.nz

backwards

29 posts

Geek
+1 received by user: 3

#1680383 30-Nov-2016 23:40

Thanks for the reply.

Looks like i'll just have to do them manually.

Cheers

Spong

1016 posts

Uber Geek
+1 received by user: 341

Trusted

#1680386 30-Nov-2016 23:44

At least you'll only need to manually configure 1x unit. You can then backup the config and use that file to restore to the other 5x units, and then just modify the user settings.

Tivo upgrades to operate with the new OzTivo EPG, support and service. Over 400 performed here so far. See: www.hillcrest.net.nz

hbngan

89 posts

Master Geek
+1 received by user: 10

ID Verified

#1681407 2-Dec-2016 17:29

I have just switched over to bigpipe, I understand they use CGnat

I am using a spa 112 to connect to 2 talk with no probs

I have rebooted router/ont several times and voip still works without re configuring anything

hbngan