2Degrees / SNAP VOIP / SIP settings on a Cisco SPA122

Forums › VoIP › 2Degrees / SNAP VOIP / SIP settings on a Cisco SPA122

nzed23

4 posts

Wannabe Geek

#222877 1-Sep-2017 16:20

Does anyone have the settings to configure a Cisco SPA122 (or 112) ATA for use with 2Degrees' HomePhone Plus? It is sitting behind my Netgear X4S router and in the same domain.

I have the username (phone number) and SIP password from 2Degrees but I can't get a dial tone.

I was using the Quick Setup on the SPA122 but nothing works.

Here are the other settings from 2Degrees.

I can't seem to find the exact settings on this forum but it seems that some people have managed to get it working. I don't want to use the Fritzbox - it's rubbish.

Thanks in advance.

aspired

37 posts

Geek
+1 received by user: 54

ID Verified

Trusted

2degrees

#1856886 1-Sep-2017 18:20

Try connect2.plus.snap.net.nz for the domain

PimpMyMagic

267 posts

Ultimate Geek
+1 received by user: 2

#1871432 23-Sep-2017 12:34

I also have a VOIP account with 2 degrees, but don't have one of their supplied modems.

I have a Cisco SPA112 model adaptor and am trying to find settings that will get it to work.

I was given the domain connect1.plus.snap.net.nz by 2 degrees and assisted in the generation of a password.

They advised me that their modems are set up by a third party company and they don't have any specialist support staff who can help with user's

own sourced equipment.

I am very keen to find a working solution if anyone else can help with this.