please help yealink w52p setup 2talk

Forums › VoIP › please help yealink w52p setup 2talk

laurasaur

42 posts

Geek

#236254 25-May-2018 18:05

have no idea what im doing

cant seem to get it to register.

fibre thru myrepublic do i need to change settings on there?

thanks

laurasaur

42 posts

Geek

#2022562 25-May-2018 18:08

do i need to change this?

CYaBro

4708 posts

Uber Geek
+1 received by user: 1182

ID Verified

Trusted

#2022584 25-May-2018 18:28

Try change the address to tls.2talk.co.nz and port 5061, for the SIP server and proxy.

And also set the transport to TLS.

Set Server Expires to 300.

You shouldn't need to do anything in the router but I would disable that setting in your screenshot.

Opinions are my own and not the views of my employer.

laurasaur

42 posts

Geek

#2022601 25-May-2018 19:15

Thanks v much. Will try tomorrow when I head back in

coffeebaron

6304 posts

Uber Geek
+1 received by user: 3566

Trusted

Lifetime subscriber

#2022634 25-May-2018 21:28

Use the auto-provisioning https://live.2talk.co.nz/provisioning/yealink-guide.html

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

laurasaur

42 posts

Geek

#2022667 25-May-2018 22:25

I tried that and it didn't seem to change any of the settings :/

Cody64

28 posts

Geek
+1 received by user: 5

#2023590 27-May-2018 21:00

Try filling in the label and Display name. I had the same issue the other day and that seemed to sort it.

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

chevrolux

4962 posts

Uber Geek
+1 received by user: 2638
Inactive user

#2023632 27-May-2018 22:03

Is that second screenshot from your router?

You will firstly want to disable SIP ALG (if it has one). Then you will want to disable any built in SIP client (like an ATA).. also sometimes worth just changing the SIP port away from 5060 even when it is disabled.

cyril7

9073 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#2023697 28-May-2018 06:27

I see you are using UDP for SIP transport, give TCP a go, I have had numerous issues on non registration (more with Cisco SPA handsets) if UDP is used.

Also, did you setup the STUN service, this may be required to traverse My Republics CG-NAT (assuming hear they use that,something make me think so)

Cyril