Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


dtooley

4 posts

Wannabe Geek


#28681 8-Dec-2008 16:29
Send private message

Hi,

i am just wondering if anyone has the working settings for italk as sip trunk in trixbox.

I have tried a few things, but i cannot get it to register..

sip show registry shows

trixbox1*CLI> sip show registry
Host                             Username             Refresh   State               Reg.Time
akl.italk.co.nz:5060        649974xxxx         120         Unregistered

i setup xlite to test my uname passwd and domain and that registers straight away.


Ask me if you need more debugg info.

im unsure how to check for any sip error codes.


my current peer details are

disallow=all
allow=ulaw&g729
canreinvite=no
context=from-trunk
dtmfmode=rfc2833
fromuser=649974xxxx
host=akl.italk.co.nz
insecure=very
secret=yyyyyy
type=friend
username=649974xxxx

registry string is
649974xxxx:yyyyyy@akl.italk.co.nz


Any info would be great...

Thanks

David


Create new topic
dtooley

4 posts

Wannabe Geek


  #182805 8-Dec-2008 17:45
Send private message

something that may or may not be contributing to my trixbox italk registration failure could be on the trixbox homepage the public ip is unknown... i have port fowarded 5060 to the pbx


im stumpt

sbiddle
29270 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  #182809 8-Dec-2008 18:11
Send private message

Register string needs to have a / and your number after it for a start

649974xxxx:yyyyyy@akl.italk.co.nz/649974xxxx

And you need to create an inbound route for this CID.

Do you have port 5060 open as well as 10000-20000 or changed your rtp.conf to a lower number such as 10000-10100 and opened these ports?

I am assuming your trixbox setup is on a static IP behind your router and does have valid DNS settings? Can you ping akl.italk.co.nz?




 
 
 
 


dtooley

4 posts

Wannabe Geek


  #182826 8-Dec-2008 18:59
Send private message

I have port fwded 5060 and now 10000 - 20000 to this pbx

the / phone number is in place

This is a fresh setup of trixbox.. i have not done anything other than what i have specified below

created static ip, set dns
created extension for my 1 phone (linksys spa942)
created call routes, inbound and outbound.
created 1 sip trunk called italk and specified what is above
deleted the default zap trunk (as i have no analog lines)


My phone has dial tone.. i can call 7777 and my phone rings..



....... OMG can someone rename my position from wannabe geek to n00b, i need to go down a level....

for sum reason the dns wasnt set...

i set it again and alk.italk.co.nz is registered...

sorry for wasting everyones time and thanks steve for the pinging suggestion...

sumed in one word...

FAIL

Create new topic





News »

Nanoleaf enhances lighting line with launch of Triangles and Mini Triangles
Posted 17-Oct-2020 20:18


Synology unveils DS1621+ 
Posted 17-Oct-2020 20:12


Ingram Micro introduces FootfallCam to New Zealand channel
Posted 17-Oct-2020 20:06


Dropbox adopts Virtual First working policy
Posted 17-Oct-2020 19:47


OPPO announces Reno4 Series 5G line-up in NZ
Posted 16-Oct-2020 08:52


Microsoft Highway to a Hundred expands to Asia Pacific
Posted 14-Oct-2020 09:34


Spark turns on 5G in Auckland
Posted 14-Oct-2020 09:29


AMD Launches AMD Ryzen 5000 Series Desktop Processors
Posted 9-Oct-2020 10:13


Teletrac Navman launches integrated multi-camera solution for transport and logistics industry
Posted 8-Oct-2020 10:57


Farmside hits 10,000 RBI customers
Posted 7-Oct-2020 15:32


NordVPN starts deploying colocated servers
Posted 7-Oct-2020 09:00


Google introduces Nest Wifi routers in New Zealand
Posted 7-Oct-2020 05:00


Orcon to bundle Google Nest Wifi router with new accounts
Posted 7-Oct-2020 05:00


Epay and Centrapay partner to create digital gift cards
Posted 2-Oct-2020 17:34


Inseego launches 5G MiFi M2000 mobile hotspot
Posted 2-Oct-2020 14:53









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.