Any reason not to get a dect 6.0 from the US?

Forums › VoIP › Any reason not to get a dect 6.0 from the US?

richms

21711 posts

Uber Geek
+1 received by user: 4501

Trusted

Subscriber

Topic # 67654 6-Sep-2010 01:10

May have an oppertunity to get a rediculously nice IP dect phone from the US, its dect 6.0 which I know wont work with the dect we have here, but I am wondering if it will work at all?

I have a 900MHz phone which is basically useless here, and I am wondering if the 1900MHz dect phones will have the same problem or not.

Richard rich.ms

sbiddle

27416 posts

Uber Geek
+1 received by user: 6863

Moderator

Trusted

Biddle Corp

Lifetime subscriber

Reply # 377045 6-Sep-2010 06:27

Why not just buy a regular DECT phone here in NZ? The only difference is a few MHz difference in channels.

richms

21711 posts

Uber Geek
+1 received by user: 4501

Trusted

Subscriber

Reply # 377119 6-Sep-2010 13:18

If you know of a sip capable one for under a hundred bucks on the gigaset that a friend has been offered is too good to pass up.

Richard rich.ms

Niel

3267 posts

Uber Geek
+1 received by user: 77

Trusted

Reply # 377170 6-Sep-2010 15:51

Doing a local Google shows DECT 6.0 is available here so most likely should be fine. Just dig a bit deeper and confirm that it is a valid frequency for NZ, because if you cause interference using a frequency not allowed here then you can get fined.

You can never have enough Volvos!